Add support for NAND gpheader image. TI Keystone2 ROM bootloader expects 8 bytes of trailing zeroes in the nand u-boot image. So add zeros at the end of the nand gph image.
Acked-by: Murali Karicheri <m-kariche...@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronz...@ti.com> --- Makefile | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Makefile b/Makefile index 966fd14..76a712e 100644 --- a/Makefile +++ b/Makefile @@ -937,6 +937,12 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot +u-boot-nand.gph: u-boot.bin FORCE + $(call if_changed,mkimage) + @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ + ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -- 1.8.3.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot