On 07/02/2014 04:36 PM, Ivan Khoronzhuk wrote:
Add script to automate NAND flash process. As for now the board has
two burn scripts - burn to boot from SPI NOR flash and burn to boot
from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi.
Also update README to contain NAND burn U-boot process description.
Signed-off-by: Ivan Khoronzhuk<ivan.khoronz...@ti.com>
---
board/ti/k2hk_evm/README | 27 ++++++++++++++++++++++++++-
include/configs/k2hk_evm.h | 4 +++-
2 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README
index bfeb05b..1da721c 100644
--- a/board/ti/k2hk_evm/README
+++ b/board/ti/k2hk_evm/README
@@ -43,6 +43,7 @@ Supported image formats:-
- u-boot.bin: for loading and running u-boot.bin through Texas instruments
code composure studio (CCS)
- u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
+ - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot
Please also update the supported boot modes to include NAND boot under
the section "Supported boot modes:"
Build instructions:
===================
@@ -55,6 +56,10 @@ To build u-boot-spi.gph
>make k2hk_evm_config
>make u-boot-spi.gph
+To build u-boot-nand.gph
+>make k2hk_evm_config
+>make u-boot-nand.gph
+
Murali
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot