This partial V2 completes the previous partial V2. It contains some final
preparational steps, and the introduction of cm-fx6 board.
Changes in V2:
- Update commit message of "arm: mx6: ddr: configure MMDC for slow_pd"
- Remove unnecessary line removal from arch/arm/cpu/armv7/mx6/ddr.c
- Move probe_mmdc_config() code straight to dram_init()
- Use imx6_spl.h
- Use imx_ddr_size()
NOTE: the correction of this patch now depends on
https://patchwork.ozlabs.org/patch/376095/
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Stefano Babic <sba...@denx.de>
Cc: Tom Rini <tr...@ti.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Tim Harvey <thar...@gateworks.com>
Nikita Kiryanov (9):
arm: mx6: ddr: configure MMDC for slow_pd
arm: mx6: ddr: fix cs0_end calculation
arm: mx6: add support for Compulab cm-fx6 CoM
arm: mx6: cm_fx6: add nand support
arm: mx6: cm_fx6: add ethernet support
arm: mx6: cm_fx6: add usb support
arm: mx6: cm_fx6: add i2c support
arm: mx6: cm_fx6: use eeprom
arm: mx6: cm_fx6: add sata support
arch/arm/cpu/armv7/mx6/ddr.c | 5 +-
board/compulab/cm_fx6/Makefile | 12 +
board/compulab/cm_fx6/cm_fx6.c | 466 +++++++++++++++++++++++++++++++++++++
board/compulab/cm_fx6/common.c | 83 +++++++
board/compulab/cm_fx6/common.h | 53 +++++
board/compulab/cm_fx6/imximage.cfg | 8 +
board/compulab/cm_fx6/spl.c | 409 ++++++++++++++++++++++++++++++++
boards.cfg | 2 +
include/configs/cm_fx6.h | 295 +++++++++++++++++++++++
9 files changed, 1330 insertions(+), 3 deletions(-)
create mode 100644 board/compulab/cm_fx6/Makefile
create mode 100644 board/compulab/cm_fx6/cm_fx6.c
create mode 100644 board/compulab/cm_fx6/common.c
create mode 100644 board/compulab/cm_fx6/common.h
create mode 100644 board/compulab/cm_fx6/imximage.cfg
create mode 100644 board/compulab/cm_fx6/spl.c
create mode 100644 include/configs/cm_fx6.h
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
