On 08/18/2014 01:16 AM, Thierry Reding wrote:
From: Thierry Reding <tred...@nvidia.com>
The Beaver has an ethernet NIC connected to the PCIe bus. Enable the
PCIe controller and the network device driver so that the device can
boot over the network.
In addition the board has a mini-PCIe expansion slot.
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&sys_3v3_pexs_reg>;
+ vdd-supply = <&ldo1_reg>;
+ avdd-supply = <&ldo2_reg>;
Just like TrimSlice, there are more regulator references in the kernel DT.
The same comment applies to the next patch (i.e. the Cardhu DT patch)
+ regulators {
...
+ vdd_5v_in_reg: regulator@0 {
...
+ sys_3v3_reg: regulator@6 {
...
+ sys_3v3_pexs_reg: regulator@7 {
This only adds 3 of the regulators that are in the kernel DT. Can we
just add the whole regulators node so the two are consistent?
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
The commit description says Beaver...
I guess this should be part of the next patch, and the two swapped?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
