On Tue, Jun 02, 2009 at 02:25:03PM -0700, Ira Snyder wrote: > > > > And what is the SICRH[30-31]? > > Did you have the matching settings for GMII with 3.3V? > > > > => md e0000118 1 > e0000118: 00000002 .... > > This looks wrong. The MPC8349EMDS board has the exact same setting in > that register. Writing 0x0 to the SICRH register did not cause the > problem to go away. >
The MPC8349EMDS config has had that setting since it was imported into U-Boot. I've copied the relevant part of include/configs/MPC8349EMDS.h below. #define CONFIG_SYS_SICRH SICRH_TSOBI1 This seems wrong for the MPC8349EMDS board. I tried setting the register value to 0x0 by hand on my MPC8349EMDS eval board, and the network still works as expected. Is this a bug in the MPC8349EMDS config? Thanks, Ira _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot