Hi Valentin, On 10/14/2014 04:21 PM, Valentin Longchamp wrote: > Hi Matthias, > > On 10/14/2014 02:32 PM, Matthias Fuchs wrote: >> Hi Valentin, >> >> my patch fixed environment from i2c eeprom. I am not sure on which board >> I ran into that trouble. Probably PMC440. So reverting my former patch >> will break environment in i2c eeprom again on many boards. > > Good that you have answered to patch. I run into that trouble on our Keymile > boards that have the environment in the EEPROM. On our boards, the environment > eeprom works with or without your patch. However, with your patch, I cannot > directly access ANY eeprom which is not on the CONFIG_I2C_ENV_EEPROM_BUS bus. > >> >> But perhaps there's a better way to fix that. > > I think that the proposal that Holger made to actually define > CONFIG_I2C_ENV_EEPROM_BUS for your boards is what I would try first. I reverted my former patch and switchedd towards CONFIG_I2C_ENV_EEPROM_BUS. This works fine for me.
So I ack your patch to revert mine :-) Matthias _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
