Today I got the final board and found out that a different
connector is used as the one on my development board. The
new connector has swaped pins for cd and wp.

This change is tested on a production ready baord.

Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com>
---
 board/bachmann/ot1200/ot1200.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
index 2ed8cf7..007c1ef 100644
--- a/board/bachmann/ot1200/ot1200.c
+++ b/board/bachmann/ot1200/ot1200.c
@@ -159,8 +159,8 @@ int board_mmc_getcd(struct mmc *mmc)
                gpio_direction_input(IMX_GPIO_NR(4, 5));
                ret = gpio_get_value(IMX_GPIO_NR(4, 5));
        } else {
-               gpio_direction_input(IMX_GPIO_NR(1, 4));
-               ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
+               gpio_direction_input(IMX_GPIO_NR(1, 5));
+               ret = !gpio_get_value(IMX_GPIO_NR(1, 5));
        }
 
        return ret;
-- 
1.9.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to