On the J6Eco EVM we have two on-board devices on the I2C5 bus; this bus is also routed to the camera and expansion connectors. I2C4 is routed to one of the expansion connectors. This patch enables usage of these two buses.
For I2C5 to work, the 'ARM: OMAP5: DRA7xx: Enable I2C5 operation' patch is required as a prerequisite. Tested on a J6 ECO EVM rev.B with a DRA726 ES1.0. Signed-off-by: Lubomir Popov <l-po...@ti.com> --- board/ti/dra7xx/evm.c | 7 +++++++ board/ti/dra7xx/mux_data.h | 8 ++++++++ 2 files changed, 15 insertions(+) diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 37df7b2..25dae8e 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -124,6 +124,13 @@ void set_muxconf_regs_essential(void) core_padconf_array_essential, sizeof(core_padconf_array_essential) / sizeof(struct pad_conf_entry)); + + if (omap_revision() == DRA722_ES1_0) { + do_set_mux32((*ctrl)->control_padconf_core_base, + core_padconf_array_j6ecoevm, + sizeof(core_padconf_array_j6ecoevm) / + sizeof(struct pad_conf_entry)); + } } #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 4824077..f155f65 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -141,4 +141,12 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {USB2_DRVVBUS, (M0 | IEN | FSC) }, {SPI1_CS1, (PEN | IDIS | M14) }, }; + +const struct pad_conf_entry core_padconf_array_j6ecoevm[] = { + {MCASP1_AXR0, (IEN | PTU | PDIS | M10)},/* I2C5_SDA */ + {MCASP1_AXR1, (IEN | PTU | PDIS | M10)},/* I2C5_SCL */ + + {MCASP4_ACLKX, (IEN | PTU | PDIS | M4)},/* I2C4_SDA */ + {MCASP4_FSX, (IEN | PTU | PDIS | M4)}, /* I2C4_SCL */ +}; #endif /* _MUX_DATA_DRA7XX_H_ */ -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot