Add samsung,vbus-gpio information for the XU3. This allows the usage of the EHCI controller on the XU3, which is connected to the SMSC LAN9514 chip (usb hub + network).
Note that this patch doesn't enable support for USB/USB networking in the default config as makes the u-boot binary too big for the current odroid setup. Signed-off-by: Sjoerd Simons <sjoerd.sim...@collabora.co.uk> --- arch/arm/dts/exynos5422-odroidxu3.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts index bd88450..1cbb835 100644 --- a/arch/arm/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -43,4 +43,7 @@ fifoth_val = <0x201f0020>; }; + ehci@12110000 { + samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */ + }; }; -- 2.1.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot