This is v11 of the patchset adding support Odroud XU3 board. link to the previous version: v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html v3: https://www.mail-archive.com/u-boot%40lists.denx.de/msg152677.html v4: https://patchwork.ozlabs.org/patch/407411/ v5: https://patchwork.ozlabs.org/patch/407941/ v6: https://patchwork.ozlabs.org/patch/408647/ v7: https://patchwork.ozlabs.org/patch/410204/ v8: https://patchwork.ozlabs.org/patch/410709/ v9: https://patchwork.ozlabs.org/patch/415514/ v10: https://patchwork.ozlabs.org/patch/416720/
The patchset by Akshay Saraswat is already merged into u-boot-samsung. Please ignore the instruction about the additional patchset in v8. How to test this patch: 1. git clone http://git.denx.de/u-boot-samsung.git 2. Apply this patchset 3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- odroid-xu3_config 4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j8 5. Now you can use u-boot-dtb.bin for your downloading WARNING: (update in V10) It was impossible to make the u-boot image smaller than 335872 bytes, and also I did not want to waste my time to make it fit for that restriction, because the discussion about this issue is in progress in malining list. I used BL2 by Suriyan Ramasami <suriya...@gmail.com> which the restriction is removed for testing. If you need the BL2 for testing, please contact me or Suriyan. Note: If you use micro SD card for your test you have to apply the below patch additionally. This patch is needed, because micro sd card is recognized as MMC1 instead of MMC0. Additional work is needed to make it work regardless of device id. Thanks for Sjoerd Simons. Not only did he comment my patchset, but he also made real patch for me. I squashed some part of that patchset, and included the remainings into my patchset. diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index ba591e7..437eaae 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -109,7 +109,7 @@ #define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SECURE_BL1_ONLY Changes for v2: - Add a patch to add new common setup header file for Odroid X2/U3 and Odroid XU3 Changes for v3: - Remove the patch which adds new common setup header file from v2 - Remove the wrong patch to fix GPIO information of Exynos 5800 - Remove unnecessary node from DT file - Remove unnecessary features from config file - Fix some trivial typos in comments Changes for v4: - Add MMC FIFO buffer's configuration to DT file - Make CONFIG_OF_CONTROL be set by the target information - Add basic document to doc/README.odroid-xu3 - Add CONFIG_CMD_EXT4 to config file - Add environment size and offset to config file - Add extra default environment to make bootable without modification - Remove unnecessary features from config file Changes for v5: - Add the specific build instruction - Update the information of patchset by Akshay Saraswat - Convert /include/ to #include in DT file Changes for v6: - Separate out the documentation to new commit - Remove unnecessary header file inclusuib from the board-specific setup file - Make the function board_clock_init be declared, only when CONFIG_BOARD_EARLY_INIT_F is defined Changes for v7: - Fix several errata in the documentation - Remove OF_CONTROL dependency from !SPL_BUILD Changes for v8: - Remove unnecessary properties in DT mmc node Changes for v9: - Remove the first patch which change GPIO entries order. It became useless, after DT support is added - Remove useless variables in the default environment - Add the new contents to the documentation of Odroid X2/U2, instead of making new document for Odorid XU3 - Remove the detailed information in the header file, and leave the reference to the documentation Changes for v10: - Move the non common configs in Exynos5420 config file to each board file - Remove the config unsets which are added to make the result image small This is needless now, because the image is not small enough even though these unsets are added. - Remove redundant DT node and properties - Remove the odroid-xu3 board file and make odroid-xu3 a variant of smdk5420 - Fix some errata in documentation - Include the patch by Sjoerd Simons as 4th patch Changes for v11: - Move the include point of exynos5420-common.h after CONFIG_ENV_IS_IN_SPI_FLASH in smdk5420.h - Remove duplicated CONFIG_CMD_EXT2/EXT4/FAT from odroid_xu3.h - Fix the typo in the comment, which is found in odroid_xu3.h - Add a comment to specify not available networking yet - Remove the patch abou EHCI Hyungwon Hwang (3): config: exynos5420: move non common configs to specific board files Odroid-XU3: Add support for Odroid-XU3 Odroid-XU3: Add documentation for Odroid-XU3 arch/arm/cpu/armv7/exynos/Kconfig | 4 +++ arch/arm/dts/Makefile | 3 ++- arch/arm/dts/exynos5422-odroidxu3.dts | 45 +++++++++++++++++++++++++++++++ board/samsung/smdk5420/Kconfig | 13 +++++++++ configs/odroid-xu3_defconfig | 4 +++ doc/README.odroid | 47 +++++++++++++++++++++----------- include/configs/exynos5420-common.h | 18 ------------- include/configs/odroid_xu3.h | 51 +++++++++++++++++++++++++++++++++++ include/configs/peach-pi.h | 6 +++++ include/configs/peach-pit.h | 6 +++++ include/configs/smdk5420.h | 11 ++++++++ 11 files changed, 173 insertions(+), 35 deletions(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 configs/odroid-xu3_defconfig create mode 100644 include/configs/odroid_xu3.h -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
