Hyungwon Hwang <human.hw...@samsung.com> writes: > This is v11 of the patchset adding support Odroud XU3 board.
I finally got around to testing this on top of v2015.01-rc3 on my XU3. As I mentioned earlier, I had to enable the USB and networking options so I could dhcp/tftp but after that it works for me. Feel free to add: Tested-by: Kevin Hilman <khil...@linaro.org> [...] > Note: If you use micro SD card for your test you have to apply the below > patch additionally. This patch is needed, because micro sd card is > recognized as MMC1 instead of MMC0. Additional work is needed to make it > work regardless of device id. FYI, with or without your MMC ID patch, I wasn't able to save the environment to the SD card I'm booting from: ODROID-XU3 # saveenv Saving Environment to MMC... dwmci_send_cmd: Timeout. MMC init failed Kevin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot