On 9 December 2014 at 07:50, Bin Meng <bmeng...@gmail.com> wrote: > Signed-off-by: Bin Meng <bmeng...@gmail.com> > --- > > Changes in v2: None > > configs/crownbay_defconfig | 6 ++++++ > include/configs/crownbay.h | 52 > ++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 58 insertions(+) > create mode 100644 configs/crownbay_defconfig > create mode 100644 include/configs/crownbay.h
Acked-by: Simon Glass <s...@chromium.org> > > diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig > new file mode 100644 > index 0000000..ce90553 > --- /dev/null > +++ b/configs/crownbay_defconfig > @@ -0,0 +1,6 @@ > +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000" > +CONFIG_X86=y > +CONFIG_TARGET_CROWNBAY=y > +CONFIG_OF_CONTROL=y > +CONFIG_OF_SEPARATE=y > +CONFIG_DEFAULT_DEVICE_TREE="crownbay" > diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h > new file mode 100644 > index 0000000..2314e62 > --- /dev/null > +++ b/include/configs/crownbay.h > @@ -0,0 +1,52 @@ > +/* > + * Copyright (C) 2014, Bin Meng <bmeng...@gmail.com> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +/* > + * board/config.h - configuration options, board specific > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include <configs/x86-common.h> > + > +#define CONFIG_SYS_MONITOR_LEN (1 << 20) > +#define CONFIG_SYS_X86_START16 0xfffff800 > +#define CONFIG_BOARD_EARLY_INIT_F > + > +#define CONFIG_X86_RESET_VECTOR > +#define CONFIG_NR_DRAM_BANKS 1 > + > +#define CONFIG_COREBOOT_SERIAL > +#define CONFIG_SMSC_LPC47M > + > +#define CONFIG_PCI_MEM_BUS 0x40000000 > +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS > +#define CONFIG_PCI_MEM_SIZE 0x80000000 > + > +#define CONFIG_PCI_PREF_BUS 0xc0000000 > +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS > +#define CONFIG_PCI_PREF_SIZE 0x20000000 > + > +#define CONFIG_PCI_IO_BUS 0x2000 > +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS > +#define CONFIG_PCI_IO_SIZE 0xe000 > + > +#define CONFIG_SYS_EARLY_PCI_INIT > +#define CONFIG_PCI_PNP > + > +#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ > + "stdout=serial\0" \ > + "stderr=serial\0" > + > +#define CONFIG_SCSI_DEV_LIST \ > + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA} > + > +/* Video is not supported */ > +#undef CONFIG_VIDEO > +#undef CONFIG_CFB_CONSOLE > + > +#endif /* __CONFIG_H */ > -- > 1.8.2.1 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot