On Tue, Nov 18, 2014 at 3:44 AM, Guillaume GARDET <guillaume.gar...@free.fr> wrote: > In SPL MMC, boot modes are exclusive. So, if MMCSD_MODE_RAW fails, the board > hangs. This patch allows to > try MMCSD_MODE_FS then, if available. > > It has been tested on a pandaboard (rev. A3).
HI Guillaume, What mode did you test this is? (RAW or FS) In Raw Mode with the omap5_uevm & beaglebone black, i've had to revert this. (I'm using RAW mode by default) U-Boot SPL 2015.01-rc3-dirty (Dec 08 2014 - 20:04:01) OMAP5432 ES2.0 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! spl: wrong MMC boot mode ### ERROR ### Please RESET the board ### Disk setup, I'm using sudo dd if=/dev/zero of=${DISK} bs=1M count=10 sudo dd if=./u-boot/MLO of=${DISK} count=1 seek=1 conv=notrunc bs=128k sudo dd if=./u-boot/u-boot.img of=${DISK} count=2 seek=1 conv=notrunc bs=384k sudo sfdisk --in-order --Linux --unit M ${DISK} <<-__EOF__ 1,,0x83,* __EOF__ Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot