Le 15/12/2014 09:43, Guillaume Gardet a écrit :
Hi Robert,
Le 12/12/2014 22:49, Robert Nelson a écrit :
On Tue, Nov 18, 2014 at 3:44 AM, Guillaume GARDET
<guillaume.gar...@free.fr> wrote:
In SPL MMC, boot modes are exclusive. So, if MMCSD_MODE_RAW fails, the board
hangs. This patch allows to
try MMCSD_MODE_FS then, if available.
It has been tested on a pandaboard (rev. A3).
HI Guillaume,
What mode did you test this is? (RAW or FS)
I did test for FS for sure, but not sure about raw mode.
In Raw Mode with the omap5_uevm & beaglebone black, i've had to revert
this. (I'm using RAW mode by default)
U-Boot SPL 2015.01-rc3-dirty (Dec 08 2014 - 20:04:01)
OMAP5432 ES2.0
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
spl: wrong MMC boot mode
### ERROR ### Please RESET the board ###
Ok, I think I found the problem. Could you test the following patch, please?
http://guillaume.gardet.free.fr/u-boot/0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
If this patch fix your boot problem, I will send it ASAP.
Just updated the patch with a better fix:
http://guillaume.gardet.free.fr/u-boot/0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
Guillaume
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
