The p2wi interface is only available on sun6i, adjust the gpio pinmux defines
for it to reflect this.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
arch/arm/cpu/armv7/sunxi/p2wi.c | 4 ++--
arch/arm/include/asm/arch-sunxi/gpio.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/p2wi.c b/arch/arm/cpu/armv7/sunxi/p2wi.c
index 48613bd..52c2c53 100644
--- a/arch/arm/cpu/armv7/sunxi/p2wi.c
+++ b/arch/arm/cpu/armv7/sunxi/p2wi.c
@@ -31,8 +31,8 @@ void p2wi_init(void)
/* Enable p2wi and PIO clk, and de-assert their resets */
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUNXI_GPL0_R_P2WI_SCK);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUNXI_GPL1_R_P2WI_SDA);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
/* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
writel(P2WI_CTRL_RESET, &p2wi->ctrl);
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h
b/arch/arm/include/asm/arch-sunxi/gpio.h
index 366c0dc..9f972ce 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -173,8 +173,8 @@ enum sunxi_gpio_number {
#define SUN4I_GPI4_SDC3 2
-#define SUNXI_GPL0_R_P2WI_SCK 3
-#define SUNXI_GPL1_R_P2WI_SDA 3
+#define SUN6I_GPL0_R_P2WI_SCK 3
+#define SUN6I_GPL1_R_P2WI_SDA 3
#define SUN8I_GPL2_R_UART_TX 2
#define SUN8I_GPL3_R_UART_RX 2
--
2.1.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
