Hi,
On 08-01-15 09:32, Ian Campbell wrote:
On Sun, 2015-01-04 at 21:05 +0100, Hans de Goede wrote:
Hitachi tx18d42vm LCD panels have an onboard controller which needs some
initialization via spi for the panel to become functional as a regular LVDS
panel.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
board/sunxi/Kconfig | 3 ++
drivers/video/Makefile | 2 +-
drivers/video/sunxi_display.c | 9 ++++++
drivers/video/sunxi_lcd_panel.c | 68 +++++++++++++++++++++++++++++++++++++++++
drivers/video/sunxi_lcd_panel.h | 9 ++++++
5 files changed, 90 insertions(+), 1 deletion(-)
create mode 100644 drivers/video/sunxi_lcd_panel.c
create mode 100644 drivers/video/sunxi_lcd_panel.h
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index fdb18a4..e9f62b9 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -357,6 +357,9 @@ config VIDEO_LCD_PANEL_PARALLEL
config VIDEO_LCD_PANEL_LVDS
bool "Generic lvds interface LCD panel"
+config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
+ bool "Hitachi tx18d42vm LCD panel"
+
endchoice
config USB_KEYBOARD
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 42b1eaa..d4fe1aa 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -39,7 +39,7 @@ obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
obj-$(CONFIG_VIDEO_SED13806) += sed13806.o
obj-$(CONFIG_VIDEO_SM501) += sm501.o
obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
-obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o videomodes.o
+obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o sunxi_lcd_panel.o videomodes.o
obj-$(CONFIG_VIDEO_TEGRA) += tegra.o
obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
obj-$(CONFIG_VIDEO_X86) += x86_fb.o
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 4b63b01..f087c2c 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -19,8 +19,13 @@
#include <fdtdec.h>
#include <fdt_support.h>
#include <video_fb.h>
+#include "sunxi_lcd_panel.h"
#include "videomodes.h"
+#ifdef CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM
+#define CONFIG_VIDEO_LCD_PANEL_LVDS
+#endif
Your reply to 1/3 made me notice this, which I somehow missed before, I
don't think this is the right way to go about this.
It seems to me that LCD_PANEL_HITACHI does not belong under the PARALLEL
vs LVDS Kconfig choice, rather it should be an independent bool option
which depends on PANEL_LVDS.
Technically you are correct, but from a user pov it seems easier to tell
the user to select which panel he has, and then the user can chose between a
bunch of generic ones (generic parallel, generic lvds) and a bunch of specific
panels which need some extra setup.
If you insist I can live with doing things your way though, either way let
me know how you want to handle this.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot