On Wednesday, February 11, 2015 at 01:55:16 PM, Luca Ellero wrote: > As stated in the iMX6 Reference Manual (Ch. 14.2), the CMDPIOWORDS field > should reflect the number of pio_words sent in the actual DMA transfer. > In all these transfers there is only one pio_word, so data field must be 1. > > Signed-off-by: Luca Ellero <[email protected]>
This was tested on MX6 only, right ? Reviewed-by: Marek Vasut <[email protected]> Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
