On 11/02/2015 21:37, Marek Vasut wrote:
On Wednesday, February 11, 2015 at 01:55:16 PM, Luca Ellero wrote:
As stated in the iMX6 Reference Manual (Ch. 14.2), the CMDPIOWORDS field
should reflect the number of pio_words sent in the actual DMA transfer.
In all these transfers there is only one pio_word, so data field must be 1.
Signed-off-by: Luca Ellero <[email protected]>
This was tested on MX6 only, right ?
Reviewed-by: Marek Vasut <[email protected]>
Best regards,
Marek Vasut
Yes, I tested it only on iMX6.
Regards
Luca Ellero
--
Luca Ellero
E-mail: [email protected]
Internet: www.brickedbrain.com
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
