+Bin and Gabriel Hi Tom,
On 9 March 2015 at 08:08, Beaman, Thomas <thomas.bea...@xerox.com> wrote: > > > Hi Simon, > > > > I see you have put support for the MinnowBoard Max in the u-boot mainline. > Thanks this is a very useful addition. I have been able to follow your > readme and build a working bare metal uboot. Using the built uboot I can > load and bring up a Linux Kernel. > > > > What I noticed from the running kernel is that only one of the two cores on > the E3825 is running. In the power PC uboots I usually see a section for the > multiple cores in the .dts file. My questions is how do I get both CPUs > running on this board. Is it a uboot .dts file setup that will enable this, > or is something in the kernel start up that does this. > > > > As a test I boot the same kernel using the EFI BIOS on the minnow board and > both CPUs are running. > > > > Any suggestions or comments you have would be welcomed. > > My guess is that the LAPIC CPU start-up is missing. It isn't 100% clear what the FSP does and does not do, but perhaps it does not do that. I did make something of a start on this with ivybridge but it isn't complete, and it seems to be needed here. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot