A set of properties has been defined for the device tree to select for
each pin the pull/func/default output configuration.
The offset for the PAD needs to be provided and if a GPIO needs to be
configured, his offset needs to be provided as well.
Here is an example:
pin_usb_host_en0@0 {
gpio-offset = <0x80 8>;
pad-offset = <0x260>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
};
Signed-off-by: Gabriel Huau <cont...@huau-gabriel.fr>
---
Added to GNATS database as unassigned-patches/138
>Responsible: patch-coord
>Message-Id: <1429805775-1809-4-git-send-email-cont...@huau-gabriel.fr>
>In-Reply-To: <1429805775-1809-1-git-send-email-cont...@huau-gabriel.fr>
>References: <1429805775-1809-1-git-send-email-cont...@huau-gabriel.fr>
>Patch-Date: Thu Apr 23 18:16:14 +0200 2015
---
arch/x86/dts/minnowmax.dts | 21 +++
arch/x86/include/asm/arch-baytrail/gpio.h | 1 +
arch/x86/include/asm/gpio.h | 1 +
drivers/gpio/intel_ich6_gpio.c | 222 ++++++++++++++++++++++++++----
include/dt-bindings/gpio/gpio.h | 20 +++
5 files changed, 239 insertions(+), 26 deletions(-)
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index c73e421..3936e21 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -6,6 +6,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
/include/ "skeleton.dtsi"
/include/ "serial.dtsi"
@@ -21,6 +23,25 @@
silent_console = <0>;
};
+ pch_pinctrl {
+ compatible = "intel,ich6-pinctrl";
+ pin_usb_host_en0@0 {
+ gpio-offset = <0x80 8>;
+ pad-offset = <0x260>;
+ mode-gpio;
+ output-value = <1>;
+ direction = <PIN_OUTPUT>;
+ };
+
+ pin_usb_host_en1@0 {
+ gpio-offset = <0x80 9>;
+ pad-offset = <0x258>;
+ mode-gpio;
+ output-value = <1>;
+ direction = <PIN_OUTPUT>;
+ };
+ };
+
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
diff --git a/arch/x86/include/asm/arch-baytrail/gpio.h
b/arch/x86/include/asm/arch-baytrail/gpio.h
index 4e8987c..85a65a8 100644
--- a/arch/x86/include/asm/arch-baytrail/gpio.h
+++ b/arch/x86/include/asm/arch-baytrail/gpio.h
@@ -9,5 +9,6 @@
/* Where in config space is the register that points to the GPIO registers? */
#define PCI_CFG_GPIOBASE 0x48
+#define PCI_CFG_IOBASE 0x4c
#endif /* _X86_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
index 1099427..ed85b08 100644
--- a/arch/x86/include/asm/gpio.h
+++ b/arch/x86/include/asm/gpio.h
@@ -147,6 +147,7 @@ struct pch_gpio_map {
} set3;
};
+int gpio_ich6_pinctrl_init(void);
void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio);
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index 7e679a0..a110d5b 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -44,21 +44,32 @@ struct ich6_bank_priv {
uint16_t lvl;
};
+#define GPIO_USESEL_OFFSET(x) (x)
+#define GPIO_IOSEL_OFFSET(x) (x + 4)
+#define GPIO_LVL_OFFSET(x) (x + 8)
+
+#define IOPAD_MODE_MASK 0x7
+#define IOPAD_PULL_ASSIGN_MASK 0x3
+#define IOPAD_PULL_ASSIGN_SHIFT 7
+#define IOPAD_PULL_STRENGTH_MASK 0x3
+#define IOPAD_PULL_STRENGTH_SHIFT 9
+
+static int __ich6_gpio_set_value(uint16_t base, unsigned offset, int value);
+static int __ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir);
+static int __ich6_gpio_set_function(uint16_t base, unsigned offset, int func);
+
/* TODO: Move this to device tree, or platform data */
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
{
gd->arch.gpio_map = map;
}
-static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
+static int gpio_ich6_get_base(unsigned long base)
{
- struct ich6_bank_platdata *plat = dev_get_platdata(dev);
pci_dev_t pci_dev; /* handle for 0:1f:0 */
u8 tmpbyte;
u16 tmpword;
u32 tmplong;
- u16 gpiobase;
- int offset;
/* Where should it be? */
pci_dev = PCI_BDF(0, 0x1f, 0);
@@ -123,9 +134,9 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
* while on the Ivybridge the bit0 is used to indicate it is an
* I/O space.
*/
- tmplong = x86_pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
+ tmplong = x86_pci_read_config32(pci_dev, base);
if (tmplong == 0x00000000 || tmplong == 0xffffffff) {
- debug("%s: unexpected GPIOBASE value\n", __func__);
+ debug("%s: unexpected BASE value\n", __func__);
return -ENODEV;
}
@@ -135,7 +146,138 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice
*dev)
* at the offset that we just read. Bit 0 indicates that it's
* an I/O address, not a memory address, so mask that off.
*/
- gpiobase = tmplong & 0xfffe;
+ return tmplong & 0xfffc;
+}
+
+int gpio_ich6_pinctrl_init(void)
+{
+ int pin_node;
+ int node;
+ u32 iobase;
+ u32 gpiobase;
+
+ /*
+ * Get the memory/io base address to configure every pins.
+ * IOBASE is used to configure the mode/pads
+ * GPIOBASE is used to configure the direction and default value
+ */
+ iobase = gpio_ich6_get_base(PCI_CFG_IOBASE);
+ if (iobase < 0) {
+ debug("%s: invalid IOBASE address (%08x)\n", __func__, iobase);
+ return -EINVAL;
+ }
+
+ gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
+ if (iobase < 0) {
+ debug("%s: invalid IOBASE address (%08x)\n", __func__, iobase);
+ return -EINVAL;
+ }
+
+ /* This is not an error to not have a pinctrl node */
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+ "intel,ich6-pinctrl");
+ if (node < 0)
+ return 0;
+
+ for (pin_node = fdt_first_subnode(gd->fdt_blob, node);
+ pin_node > 0;
+ pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) {
+ u32 gpio_offset[2] = { -1, -1 };
+ u32 pad_offset;
+ u32 tmplong;
+ const void *tmpnode;
+
+ /*
+ * The offset for the same pin for the IOBASE and GPIOBASE are
+ * different, so instead of maintaining a lookup table,
+ * the device tree should provide directly the correct
+ * value for both mapping.
+ */
+ pad_offset = fdtdec_get_int(gd->fdt_blob, pin_node,
+ "pad-offset", -1);
+ if (pad_offset == -1) {
+ debug("%s: Invalid register io offset %d\n",
+ __func__, pad_offset);
+ return -EINVAL;
+ }
+
+ /*
+ * GPIO node is not mandatory, so we only do the
+ * pinmuxing if the node exist.
+ */
+ fdtdec_get_int_array(gd->fdt_blob, pin_node,
+ "gpio-offset", gpio_offset, 2);
+ if (gpio_offset[0] != -1) {
+ /* Do we want to force the GPIO mode? */
+ tmpnode = fdt_getprop(gd->fdt_blob, pin_node,
+ "mode-gpio", NULL);
+ if (tmpnode)
+ __ich6_gpio_set_function(GPIO_USESEL_OFFSET
+ (gpiobase) +
+ gpio_offset[0],
+ gpio_offset[1], 1);
+
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "direction",
+ -1);
+ if (tmplong != -1)
+ __ich6_gpio_set_direction(GPIO_IOSEL_OFFSET
+ (gpiobase) +
+ gpio_offset[0],
+ gpio_offset[1],
+ tmplong);
+
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node,
+ "output-value", -1);
+ if (tmplong != -1)
+ __ich6_gpio_set_value(GPIO_LVL_OFFSET(gpiobase)
+ + gpio_offset[0],
+ gpio_offset[1], tmplong);
+ }
+
+ /*
+ * Do we need to set a specific function mode?
+ * If someone put also 'mode-gpio', this option will
+ * be just ignored by the controller
+ */
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1);
+ if (tmplong != -1)
+ clrsetbits_le32(iobase + pad_offset, IOPAD_MODE_MASK,
+ tmplong);
+
+ /* Configure the pull-up/down if needed */
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1);
+ if (tmplong != -1)
+ clrsetbits_le32(iobase + pad_offset,
+ IOPAD_PULL_ASSIGN_MASK <<
+ IOPAD_PULL_ASSIGN_SHIFT,
+ tmplong << IOPAD_PULL_ASSIGN_SHIFT);
+
+ tmplong =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength", -1);
+ if (tmplong != -1)
+ clrsetbits_le32(iobase + pad_offset,
+ IOPAD_PULL_STRENGTH_MASK <<
+ IOPAD_PULL_STRENGTH_SHIFT,
+ tmplong << IOPAD_PULL_STRENGTH_SHIFT);
+
+ debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset,
+ readl(iobase + pad_offset));
+ }
+
+ return 0;
+}
+
+static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ich6_bank_platdata *plat = dev_get_platdata(dev);
+ u16 gpiobase;
+ int offset;
+
+ gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
if (offset == -1) {
debug("%s: Invalid register offset %d\n", __func__, offset);
@@ -189,33 +331,56 @@ static int ich6_gpio_request(struct udevice *dev,
unsigned offset,
return 0;
}
-static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
+static int __ich6_gpio_set_function(uint16_t base, unsigned offset, int func)
{
- struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
- tmplong = inl(bank->io_sel);
- tmplong |= (1UL << offset);
- outl(bank->io_sel, tmplong);
+ if (func) {
+ tmplong = inl(base);
+ tmplong |= (1UL << offset);
+ outl(tmplong, base);
+ } else {
+ tmplong = inl(base);
+ tmplong &= ~(1UL << offset);
+ outl(tmplong, base);
+ }
+
return 0;
}
-static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
- int value)
+static int __ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir)
{
- struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
- gpio_set_value(offset, value);
+ if (!dir) {
+ tmplong = inl(base);
+ tmplong |= (1UL << offset);
+ outl(tmplong, base);
+ } else {
+ tmplong = inl(base);
+ tmplong &= ~(1UL << offset);
+ outl(tmplong, base);
+ }
- tmplong = inl(bank->io_sel);
- tmplong &= ~(1UL << offset);
- outl(bank->io_sel, tmplong);
return 0;
}
-static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
+static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
+
+ return __ich6_gpio_set_direction(inl(bank->io_sel), offset, 0);
+}
+
+static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
+
+ return __ich6_gpio_set_direction(inl(bank->io_sel), offset, 1);
+}
+static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
@@ -226,21 +391,26 @@ static int ich6_gpio_get_value(struct udevice *dev,
unsigned offset)
return r;
}
-static int ich6_gpio_set_value(struct udevice *dev, unsigned offset,
- int value)
+static int __ich6_gpio_set_value(uint16_t base, unsigned offset, int value)
{
- struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
-
- tmplong = inl(bank->lvl);
+ tmplong = inl(base);
if (value)
tmplong |= (1UL << offset);
else
tmplong &= ~(1UL << offset);
- outl(bank->lvl, tmplong);
+ outl(tmplong, base);
+
return 0;
}
+static int ich6_gpio_set_value(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
+ return __ich6_gpio_set_value(bank->lvl, offset, value);
+}
+
static int ich6_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
index e6b1e0a..49d437c 100644
--- a/include/dt-bindings/gpio/gpio.h
+++ b/include/dt-bindings/gpio/gpio.h
@@ -12,4 +12,24 @@
#define GPIO_ACTIVE_HIGH 0
#define GPIO_ACTIVE_LOW 1
+#define GPIO_MODE_NATIVE 0
+#define GPIO_MODE_GPIO 1
+
+#define GPIO_MODE_FUNC0 0
+#define GPIO_MODE_FUNC1 1
+#define GPIO_MODE_FUNC2 2
+#define GPIO_MODE_FUNC4 4
+#define GPIO_MODE_FUNC5 5
+#define GPIO_MODE_FUNC6 6
+
+#define PIN_INPUT 0
+#define PIN_OUTPUT 1
+
+#define PIN_INPUT_NOPULL 0
+#define PIN_INPUT_PULLUP 1
+#define PIN_INPUT_PULLDOWN 2
+
+#define PULL_STR_2K 0
+#define PULL_STR_20K 2
+
#endif
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
