Hi Bin,
On 04/23/2015 08:23 PM, Bin Meng wrote:
Hi Gabriel,
On Fri, Apr 24, 2015 at 12:16 AM, Gabriel Huau <cont...@huau-gabriel.fr> wrote:
This serie of patches adds the support of pin-muxing from the device tree
through
different properties. I have put two example to enable the USB Host on the
minnowboard max.
The support of the call to 'setup_pch_gpios' is still supported and
only the minnowboard has been tested with the device tree implementation.
Because the GPIO and IO base register ares different, I have also defined
some proxy function to set the function/value and direction of the GPIO as
the GPIO register can override some registers in the IO.
Gabriel Huau (4):
x86: baytrail: fix the GPIOBASE address
x86: minnowmax: add GPIO banks in the device tree
x86: gpio: add pinctrl support from the device tree
x86: minnowmax: initialize the pin-muxing from device tree
arch/x86/dts/minnowmax.dts | 63 +++++++++
arch/x86/include/asm/arch-baytrail/gpio.h | 3 +-
arch/x86/include/asm/gpio.h | 1 +
board/intel/minnowmax/minnowmax.c | 9 ++
drivers/gpio/intel_ich6_gpio.c | 222 ++++++++++++++++++++++++++----
include/configs/minnowmax.h | 1 +
include/dt-bindings/gpio/gpio.h | 20 +++
7 files changed, 292 insertions(+), 27 deletions(-)
--
Thanks for these patches! Just a general comment, you don't need send
emails to u-boot-patc...@bugs.denx.de, and always include a simple
sentence in the commit message :)
Regards,
Bin
That's why I received plenty of emails to tell me that my patches were
not assigned :).
I'll do the modification for the next version, thank you for the
feedback, I appreciate this.
Regards,
Gabriel
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
