Hi Francesco, On Fri, Apr 24, 2015 at 3:20 PM, Francesco Lucconi <lucc...@gmail.com> wrote: > I'm Francesco Lucconi from Italy, and I'm involved into a x86 project where > my issue is to compile a u-boot (I'm currently using uboot-2015.01) and to > install it into a VID (virtual image disk) of virtualbox. > > > I've already tuned the MBR, registering two FAT16 partitions, one for > u-boot and the other one for future kernel uImage and firmware development. > In this moment I figured out that I've installed correctly the MBR cause I > can see on the display strings I've applied on the MBR source code but it > seems that u-boot.bin code doesn't run correctly, the system hangs out.... > Could you give me any tips I didn't notice before?
Could you elaborate more on what BIOS is being used, and what MBR codes is that? Is it grub? Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
