Hi Francesco, On 27 April 2015 at 00:56, Francesco Lucconi <lucc...@gmail.com> wrote: > > 2015-04-25 1:04 GMT+02:00 Bin Meng <bmeng...@gmail.com>: >> >> Hi Francesco, >> >> On Fri, Apr 24, 2015 at 3:20 PM, Francesco Lucconi <lucc...@gmail.com> >> wrote: >> > I'm Francesco Lucconi from Italy, and I'm involved into a x86 project >> > where >> > my issue is to compile a u-boot (I'm currently using uboot-2015.01) and >> > to >> > install it into a VID (virtual image disk) of virtualbox. >> > >> > >> > I've already tuned the MBR, registering two FAT16 partitions, one for >> > u-boot and the other one for future kernel uImage and firmware >> > development. >> > In this moment I figured out that I've installed correctly the MBR cause >> > I >> > can see on the display strings I've applied on the MBR source code but >> > it >> > seems that u-boot.bin code doesn't run correctly, the system hangs >> > out.... >> > Could you give me any tips I didn't notice before? >> >> Could you elaborate more on what BIOS is being used, and what MBR >> codes is that? Is it grub? >> >> >> Regards, >> Bin > > > @Simon Glass: About u-boot I'm using coreboot_x86 config, and with > u-boot.srec I noticed that I received several prints of startup ( like this > "......................" ) but later the virtual machine hangs up.
Did you follow the instruction sin README.x86? Can you provide console output? > > @Bin Meng: I'm using BIOS embedded of Virtualbox platform and I've > customized the 512 bytes MBR data with several debug prints and with the > partitions table based on the features of my FAT16 partitions. > > Regards, > Francesco > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot