Dear Dirk Behme,
In message <4a59fbda.70...@googlemail.com> you wrote:
>
> I understood Jean-Christophe that he wants
>
> board/omap3/<vendor>
>
> and this is what I doesn't like. At least not for the first board of a
> company. If they, later, add some additional (OMAP3) boards, moving
> then to board/omap3/<vendor>/<board_A>/,
Agred - board/omap3/<vendor> is not acceptable, not for the first
board, nor for any number of boards. If a vendor directory is used,
then ist must go as board/<vendor>
Otherwise we will have the same "<vendor>" directories all over the
place for all processors supported by a vendor - and for some active
board vendors that can be a _lot_.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
"The first rule of magic is simple. Don't waste your time waving your
hands and hoping when a rock or a club will do."
- McCloctnik the Lucid
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
