[U-Boot] [PATCH 07/11] imx: ocotp: mxc add i.MX7D support

[Adrian Alonso]

* Ocotp of i.MX7D has different operation rule.
  This patch is to add support for i.MX7D ocotp.

Signed-off-by: Adrian Alonso <aalo...@freescale.com>
Signed-off-by: Peng Fan <peng....@freescale.com>
Signed-off-by: Ye.Li <b37...@freescale.com>
---
 drivers/misc/mxc_ocotp.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c
index d92044e..7f0e9e4 100644
--- a/drivers/misc/mxc_ocotp.c
+++ b/drivers/misc/mxc_ocotp.c
@@ -25,8 +25,21 @@
 #define BM_CTRL_ERROR                  0x00000200
 #define BM_CTRL_BUSY                   0x00000100
 #define BO_CTRL_ADDR                   0
+#ifdef CONFIG_MX7
+#define BM_CTRL_ADDR                    0x0000000f
+#define BM_CTRL_RELOAD                  0x00000400
+#else
 #define BM_CTRL_ADDR                   0x0000007f
-
+#endif
+
+#ifdef CONFIG_MX7
+#define BO_TIMING_FSOURCE               12
+#define BM_TIMING_FSOURCE               0x0007f000
+#define BV_TIMING_FSOURCE_NS            1001
+#define BO_TIMING_PROG                  0
+#define BM_TIMING_PROG                  0x00000fff
+#define BV_TIMING_PROG_US               10
+#else
 #define BO_TIMING_STROBE_READ          16
 #define BM_TIMING_STROBE_READ          0x003f0000
 #define BV_TIMING_STROBE_READ_NS       37
@@ -36,6 +49,7 @@
 #define BO_TIMING_STROBE_PROG          0
 #define BM_TIMING_STROBE_PROG          0x00000fff
 #define BV_TIMING_STROBE_PROG_US       10
+#endif
 
 #define BM_READ_CTRL_READ_FUSE         0x00000001
 
@@ -109,6 +123,25 @@ int fuse_read(u32 bank, u32 word, u32 *val)
        return finish_access(regs, __func__);
 }
 
+#ifdef CONFIG_MX7
+static void set_timing(struct ocotp_regs *regs)
+{
+       u32 ipg_clk;
+       u32 fsource, prog;
+       u32 timing;
+
+       ipg_clk = mxc_get_clock(MXC_IPG_CLK);
+
+       fsource = DIV_ROUND_UP((ipg_clk / 1000) * BV_TIMING_FSOURCE_NS,
+                       +       1000000) + 1;
+       prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_PROG_US, 1000000) + 1;
+
+       timing = BF(fsource, TIMING_FSOURCE) | BF(prog, TIMING_PROG);
+
+       clrsetbits_le32(&regs->timing, BM_TIMING_FSOURCE | BM_TIMING_PROG,
+                       timing);
+}
+#else
 static void set_timing(struct ocotp_regs *regs)
 {
        u32 ipg_clk;
@@ -130,12 +163,17 @@ static void set_timing(struct ocotp_regs *regs)
        clrsetbits_le32(&regs->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX |
                        BM_TIMING_STROBE_PROG, timing);
 }
+#endif
 
 static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word,
                                int write)
 {
        u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
+#ifdef CONFIG_MX7
+       u32 addr = bank;
+#else
        u32 addr = bank << 3 | word;
+#endif
 
        set_timing(regs);
        clrsetbits_le32(&regs->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR,
@@ -155,7 +193,11 @@ int fuse_sense(u32 bank, u32 word, u32 *val)
        setup_direct_access(regs, bank, word, false);
        writel(BM_READ_CTRL_READ_FUSE, &regs->read_ctrl);
        wait_busy(regs, 1);
+#ifdef CONFIG_MX7
+       *val = readl((&regs->read_fuse_data0) + (word << 2));
+#else
        *val = readl(&regs->read_fuse_data);
+#endif
 
        return finish_access(regs, __func__);
 }
@@ -176,8 +218,38 @@ int fuse_prog(u32 bank, u32 word, u32 val)
                return ret;
 
        setup_direct_access(regs, bank, word, true);
+#ifdef CONFIG_MX7
+       switch (word) {
+       case 0:
+               writel(0, &regs->data1);
+               writel(0, &regs->data2);
+               writel(0, &regs->data3);
+               writel(val, &regs->data0);
+               break;
+       case 1:
+               writel(val, &regs->data1);
+               writel(0, &regs->data2);
+               writel(0, &regs->data3);
+               writel(0, &regs->data0);
+               break;
+       case 2:
+               writel(0, &regs->data1);
+               writel(val, &regs->data2);
+               writel(0, &regs->data3);
+               writel(0, &regs->data0);
+               break;
+       case 3:
+               writel(0, &regs->data1);
+               writel(0, &regs->data2);
+               writel(val, &regs->data3);
+               writel(0, &regs->data0);
+               break;
+       }
+       wait_busy(regs, BV_TIMING_PROG_US);
+#else
        writel(val, &regs->data);
        wait_busy(regs, BV_TIMING_STROBE_PROG_US);
+#endif
        udelay(WRITE_POSTAMBLE_US);
 
        return finish_access(regs, __func__);
-- 
2.1.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot