Add kconfig options for various SPI flashes and use them in cm-fx6 defconfig.
Cc: Jagan Teki <jt...@openedev.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
---
configs/cm_fx6_defconfig | 8 ++++++++
drivers/mtd/spi/Kconfig | 44 ++++++++++++++++++++++++++++++++++++++++++++
include/configs/cm_fx6.h | 8 --------
3 files changed, 52 insertions(+), 8 deletions(-)
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index f0fd48c..2aba359 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -13,6 +13,14 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_USB=y
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 4f0c040..8b730ff 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -42,6 +42,50 @@ config SPI_FLASH_BAR
Bank/Extended address registers are used to access the flash
which has size > 16MiB in 3-byte addressing.
+if SPI_FLASH
+
+config SPI_FLASH_ATMEL
+ bool "Atmel SPI flash support"
+ help
+ Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
+
+config SPI_FLASH_EON
+ bool "EON SPI flash support"
+ help
+ Add support for various EON SPI flash chips (EN25xxx)
+
+config SPI_FLASH_GIGADEVICE
+ bool "GigaDevice SPI flash support"
+ help
+ Add support for various GigaDevice SPI flash chips (GD25xxx)
+
+config SPI_FLASH_MACRONIX
+ bool "Macronix SPI flash support"
+ help
+ Add support for various Macronix SPI flash chips (MX25Lxxx)
+
+config SPI_FLASH_SPANSION
+ bool "Spansion SPI flash support"
+ help
+ Add support for various Spansion SPI flash chips (S25FLxxx)
+
+config SPI_FLASH_STMICRO
+ bool "STMicro SPI flash support"
+ help
+ Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
+
+config SPI_FLASH_SST
+ bool "SST SPI flash support"
+ help
+ Add support for various SST SPI flash chips (SST25xxx)
+
+config SPI_FLASH_WINBOND
+ bool "Winbond SPI flash support"
+ help
+ Add support for various Winbond SPI flash chips (W25xxx)
+
+endif
+
config SPI_FLASH_DATAFLASH
bool "AT45xxx DataFlash support"
depends on SPI_FLASH && DM_SPI_FLASH
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 059004c..bbd9f38 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -162,14 +162,6 @@
/* SPI */
#define CONFIG_SPI
#define CONFIG_MXC_SPI
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_WINBOND
/* NAND */
#ifndef CONFIG_SPL_BUILD
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
