(added Stefano as imx custodian) On 04.08.2015 19:28, Clemens Gruber wrote: > This allows baseboards without SPI to compile. > > Signed-off-by: Clemens Gruber <clemens.gru...@pqgruber.com> > Cc: Markus Niebel <markus.nie...@tq-group.com> > Cc: Tom Rini <tr...@konsulko.com> > --- > board/tqc/tqma6/tqma6.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c > index 29db838..5c4d104 100644 > --- a/board/tqc/tqma6/tqma6.c > +++ b/board/tqc/tqma6/tqma6.c > @@ -131,6 +131,8 @@ int board_mmc_init(bd_t *bis) > return 0; > } > > +#if defined(CONFIG_MXC_SPI) > + > static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = { > /* SS1 */ > NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL), > @@ -161,6 +163,8 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) > (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1; > } > > +#endif /* defined(CONFIG_MXC_SPI) */ > + > static struct i2c_pads_info tqma6_i2c3_pads = { > /* I2C3: on board LM75, M24C64, */ > .scl = { > @@ -201,7 +205,9 @@ int board_init(void) > /* address of boot parameters */ > gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; > > +#if defined(CONFIG_MXC_SPI) > tqma6_iomuxc_spi(); > +#endif > tqma6_setup_i2c();
Hmmm. This should not be necessary. Please take a look at the wru4 baseboard addition that is already in mainline. Especially this patch: commit 34ee786e5b388625e5a0e0891ee69d4bbf34178b Author: Stefan Roese <s...@denx.de> Date: Thu Mar 12 13:34:30 2015 +0100 arm: mx6: tqma6: Update to optionally configure an alternative SPI setup By making the tqma6_iomuxc_spi() weak, this patch adds the possibility to add a different function for this SPI configuration. This can be used by other baseboards, that might have a different SPI setup. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <s...@denx.de> This is enough in your baseboard file now: void tqma6_iomuxc_spi(void) { /* No SPI on this baseboard */ } Thanks, Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot