This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/cpu/armv7/omap3/Kconfig | 4 -
board/logicpd/omap3som/Kconfig | 12 --
board/logicpd/omap3som/MAINTAINERS | 6 -
board/logicpd/omap3som/Makefile | 8 -
board/logicpd/omap3som/omap3logic.c | 242 ---------------------------
board/logicpd/omap3som/omap3logic.h | 31 ----
configs/omap3_logic_defconfig | 8 -
include/configs/omap3_logic.h | 322 ------------------------------------
8 files changed, 633 deletions(-)
delete mode 100644 board/logicpd/omap3som/Kconfig
delete mode 100644 board/logicpd/omap3som/MAINTAINERS
delete mode 100644 board/logicpd/omap3som/Makefile
delete mode 100644 board/logicpd/omap3som/omap3logic.c
delete mode 100644 board/logicpd/omap3som/omap3logic.h
delete mode 100644 configs/omap3_logic_defconfig
delete mode 100644 include/configs/omap3_logic.h
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 336da53..9665c95 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -87,9 +87,6 @@ config TARGET_MCX
bool "MCX"
select SUPPORT_SPL
-config TARGET_OMAP3_LOGIC
- bool "OMAP3 Logic"
-
config TARGET_OMAP3_MVBLX
bool "OMAP3 MVBLX"
@@ -139,7 +136,6 @@ source "board/pandora/Kconfig"
source "board/8dtech/eco5pk/Kconfig"
source "board/corscience/tricorder/Kconfig"
source "board/htkw/mcx/Kconfig"
-source "board/logicpd/omap3som/Kconfig"
source "board/matrix_vision/mvblx/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/technexion/tao3530/Kconfig"
diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig
deleted file mode 100644
index 03d272a..0000000
--- a/board/logicpd/omap3som/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_LOGIC
-
-config SYS_BOARD
- default "omap3som"
-
-config SYS_VENDOR
- default "logicpd"
-
-config SYS_CONFIG_NAME
- default "omap3_logic"
-
-endif
diff --git a/board/logicpd/omap3som/MAINTAINERS
b/board/logicpd/omap3som/MAINTAINERS
deleted file mode 100644
index ffe2201..0000000
--- a/board/logicpd/omap3som/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-OMAP3SOM BOARD
-M: Peter Barada <peter.bar...@logicpd.com>
-S: Maintained
-F: board/logicpd/omap3som/
-F: include/configs/omap3_logic.h
-F: configs/omap3_logic_defconfig
diff --git a/board/logicpd/omap3som/Makefile b/board/logicpd/omap3som/Makefile
deleted file mode 100644
index 87b86ad..0000000
--- a/board/logicpd/omap3som/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := omap3logic.o
diff --git a/board/logicpd/omap3som/omap3logic.c
b/board/logicpd/omap3som/omap3logic.c
deleted file mode 100644
index 609edf1..0000000
--- a/board/logicpd/omap3som/omap3logic.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * (C) Copyright 2011
- * Logic Product Development <www.logicpd.com>
- *
- * Author :
- * Peter Barada <peter.bar...@logicpd.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- * Richard Woodruff <r-woodru...@ti.com>
- * Syed Mohammed Khasim <kha...@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <netdev.h>
-#include <flash.h>
-#include <nand.h>
-#include <i2c.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include "omap3logic.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * two dimensional array of strucures containining board name and Linux
- * machine IDs; row it selected based on CPU column is slected based
- * on hsusb0_data5 pin having a pulldown resistor
- */
-static struct board_id {
- char *name;
- int machine_id;
-} boards[2][2] = {
- {
- {
- .name = "OMAP35xx SOM LV",
- .machine_id = MACH_TYPE_OMAP3530_LV_SOM,
- },
- {
- .name = "OMAP35xx Torpedo",
- .machine_id = MACH_TYPE_OMAP3_TORPEDO,
- },
- },
- {
- {
- .name = "DM37xx SOM LV",
- .machine_id = MACH_TYPE_DM3730_SOM_LV,
- },
- {
- .name = "DM37xx Torpedo",
- .machine_id = MACH_TYPE_DM3730_TORPEDO,
- },
- },
-};
-
-/*
- * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
- */
-#define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- struct board_id *board;
- unsigned int val;
-
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- /*
- * To identify between a SOM LV and Torpedo module,
- * a pulldown resistor is on hsusb0_data5 for the SOM LV module.
- * Drive the pin (and let it soak), then read it back.
- * If the pin is still high its a Torpedo. If low its a SOM LV
- */
-
- /* Mux hsusb0_data5 as a GPIO */
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4));
-
- if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
-
- /*
- * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
- * will drain the voltage.
- */
- gpio_direction_output(BOARD_ID_GPIO, 0);
- gpio_set_value(BOARD_ID_GPIO, 1);
-
- /* Let it soak for a bit */
- sdelay(0x100);
-
- /*
- * Read state of BOARD_ID_GPIO as an input and if its set.
- * If so the board is a Torpedo
- */
- gpio_direction_input(BOARD_ID_GPIO);
- val = gpio_get_value(BOARD_ID_GPIO);
- gpio_free(BOARD_ID_GPIO);
-
- board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
- printf("Board: %s\n", board->name);
-
- /* Set the machine_id passed to Linux */
- gd->bd->bi_arch_number = board->machine_id;
- }
-
- /* restore hsusb0_data5 pin as hsusb0_data5 */
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));
-
- return 0;
-}
-
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_GENERIC_MMC)
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(0);
-}
-#endif
-
-#ifdef CONFIG_SMC911X
-/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
-static const u32 gpmc_lan92xx_config[] = {
- NET_LAN92XX_GPMC_CONFIG1,
- NET_LAN92XX_GPMC_CONFIG2,
- NET_LAN92XX_GPMC_CONFIG3,
- NET_LAN92XX_GPMC_CONFIG4,
- NET_LAN92XX_GPMC_CONFIG5,
- NET_LAN92XX_GPMC_CONFIG6,
-};
-
-int board_eth_init(bd_t *bis)
-{
- enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
- CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-}
-#endif
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- /*GPMC*/
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M4));
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | DIS | M1));
/*GPMC_IO_DIR*/
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0));
-
- /*Expansion card */
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
-
- /* Serial Console */
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0));
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0));
-
- /* I2C */
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0));
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0));
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
-
- MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0));
-
- /*Control and debug */
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0));
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0));
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
-}
diff --git a/board/logicpd/omap3som/omap3logic.h
b/board/logicpd/omap3som/omap3logic.h
deleted file mode 100644
index 3a3ef6e..0000000
--- a/board/logicpd/omap3som/omap3logic.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * (C) Copyright 2011
- * Logic Product Development <www.logicpd.com>
- *
- * Author:
- * Peter Barada <peter.bar...@logicpd.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _OMAP3LOGIC_H_
-#define _OMAP3LOGIC_H_
-
-/*
- * OMAP3 GPMC register settings for CS1 LAN922x
- */
-#define NET_LAN92XX_GPMC_CONFIG1 0x00001000
-#define NET_LAN92XX_GPMC_CONFIG2 0x00080801
-#define NET_LAN92XX_GPMC_CONFIG3 0x00000000
-#define NET_LAN92XX_GPMC_CONFIG4 0x08010801
-#define NET_LAN92XX_GPMC_CONFIG5 0x00080a0a
-#define NET_LAN92XX_GPMC_CONFIG6 0x03000280
-
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "Logic DM37x/OMAP35x reference board",
- "NAND",
-};
-
-
-#endif
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
deleted file mode 100644
index 5d0ac9e..0000000
--- a/configs/omap3_logic_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP34XX=y
-CONFIG_TARGET_OMAP3_LOGIC=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_SYS_PROMPT="OMAP Logic # "
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
deleted file mode 100644
index e09e617..0000000
--- a/include/configs/omap3_logic.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
- * Peter Barada <peter.bar...@logicpd.com>
- *
- * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
- * reference boards.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP /* in a TI OMAP core */
-#define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
-#define CONFIG_SYS_TEXT_BASE 0x80400000
-
-#define CONFIG_SDRC /* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_CMDLINE_EDITING /* cmd line edit/history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
- /* Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
-#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-/* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2 /* EXT2 Support */
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
-#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\
- "1920k(u-boot),128k(u-boot-env),"\
- "4m(kernel),-(fs)"
-
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_NAND /* NAND support */
-#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_QUIET_TEST
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
- /* to access nand */
-#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
- /* to access nand at */
- /* CS0 */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
- /* NAND devices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
- /* partition */
-
-/* Environment information */
-#define CONFIG_BOOTDELAY 2
-
-/*
- * PREBOOT assumes the 4.3" display is attached. User can interrupt
- * and modify display variable to suit their needs.
- */
-#define CONFIG_PREBOOT \
- "echo ======================NOTICE============================;"\
- "echo \"The u-boot environment is not set.\";" \
- "echo \"If using a display a valid display varible for your panel\";" \
- "echo \"needs to be set.\";" \
- "echo \"Valid display options are:\";" \
- "echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \
- "echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \
- "echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \
- "echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \
- "echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \
- "echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";" \
- "echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";" \
- "echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";" \
- "echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";" \
- "echo \"Defaulting to 4.3 LCD panel (display=15).\";" \
- "setenv display 15;" \
- "setenv preboot;" \
- "saveenv;"
-
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x81000000\0" \
- "bootfile=uImage\0" \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
- "mmcdev=0\0" \
- "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "run defaultboot;" \
- "fi; " \
- "else run defaultboot; fi\0" \
- "defaultboot=run mmcramboot\0" \
- "consoledevice=ttyO0\0" \
- "display=15\0" \
- "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
- "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
- "rotation=0\0" \
- "vrfb_arg=if itest ${rotation} -ne 0; then " \
- "setenv bootargs ${bootargs} omapfb.vrfb=y " \
- "omapfb.rotate=${rotation}; " \
- "fi\0" \
- "otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \
- "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "common_bootargs=setenv bootargs ${bootargs} display=${display} " \
- "${otherbootargs};" \
- "run addmtdparts; " \
- "run vrfb_arg\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo 'Running bootscript from mmc ...'; " \
- "source ${loadaddr}\0" \
- "loaduimage=mmc rescan ${mmcdev}; " \
- "fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
- "ramdisksize=64000\0" \
- "ramdiskaddr=0x82000000\0" \
- "ramdiskimage=rootfs.ext2.gz.uboot\0" \
- "ramargs=run setconsole; setenv bootargs console=${console} " \
- "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
- "mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \
- "run ramargs; " \
- "run common_bootargs; " \
- "run dump_bootargs; " \
- "run loaduimage; " \
- "fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\
- "bootm ${loadaddr} ${ramdiskaddr}\0" \
- "ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
- "run ramargs; " \
- "run common_bootargs; " \
- "run dump_bootargs; " \
- "tftpboot ${loadaddr} ${bootfile}; "\
- "tftpboot ${ramdiskaddr} ${ramdiskimage}; "\
- "bootm ${loadaddr} ${ramdiskaddr}\0"
-
-#define CONFIG_BOOTCOMMAND \
- "run autoboot"
-
-#define CONFIG_AUTO_COMPLETE
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
- 0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
- /* address */
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-
-/*
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE NAND_BASE
-#elif defined(CONFIG_CMD_ONENAND)
-#define CONFIG_SYS_FLASH_BASE ONENAND_MAP
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
-#endif
-
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-/*
- * SMSC922x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_SMC911X_BASE 0x08000000
-
-#endif /* (CONFIG_CMD_NET) */
-
-/*
- * BOOTP fields
- */
-
-#define CONFIG_BOOTP_SUBNETMASK 0x00000001
-#define CONFIG_BOOTP_GATEWAY 0x00000002
-#define CONFIG_BOOTP_HOSTNAME 0x00000004
-#define CONFIG_BOOTP_BOOTPATH 0x00000010
-
-#endif /* __CONFIG_H */
--
2.5.0.457.gab17608
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
