Hi,
On 31-08-15 16:46, Maxime Ripard wrote:
The A13-Olinuxino has a mini-USB connector that can be used to power up
the board and as an OTG connector.
Since we have already some USB host-only ports right beside this one,
enable it in gadget mode
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
configs/A13-OLinuXino_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 4b4337223ca5..70aa194b91c4 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_DRAM_EMR1=0
+CONFIG_USB0_VBUS_DET="PG1"
CONFIG_USB1_VBUS_PIN="PG11"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
@@ -11,6 +12,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
The CONFIG_xxx defines for using MUSB in either host or gadget mode have
changed in v2015.10, looks like you need to rebase this series and fix
this.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot