Convert altera_jtag_uart to driver model.
Signed-off-by: Thomas Chou <tho...@wytron.com.tw>
---
arch/nios2/dts/3c120_devboard.dts | 5 ++
configs/nios2-generic_defconfig | 3 +
drivers/serial/Kconfig | 13 ++++
drivers/serial/altera_jtag_uart.c | 125 +++++++++++++++++++++-----------------
include/configs/nios2-generic.h | 3 -
5 files changed, 90 insertions(+), 59 deletions(-)
diff --git a/arch/nios2/dts/3c120_devboard.dts
b/arch/nios2/dts/3c120_devboard.dts
index bd32842..dfe1ec4 100644
--- a/arch/nios2/dts/3c120_devboard.dts
+++ b/arch/nios2/dts/3c120_devboard.dts
@@ -71,6 +71,7 @@
reg = <0x08004d50 0x00000008>;
interrupt-parent = <&cpu>;
interrupts = <1>;
+ u-boot,dm-pre-reloc;
};
tse_mac: ethernet@0x4000 {
@@ -132,6 +133,10 @@
};
};
+ aliases {
+ console = &jtag_uart;
+ };
+
chosen {
bootargs = "debug console=ttyJ0,115200";
};
diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
index 9c1bec5..9dc6a72 100644
--- a/configs/nios2-generic_defconfig
+++ b/configs/nios2-generic_defconfig
@@ -1,4 +1,5 @@
CONFIG_NIOS2=y
+CONFIG_DM_SERIAL=y
CONFIG_TARGET_NIOS2_GENERIC=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
CONFIG_HUSH_PARSER=y
@@ -14,3 +15,5 @@ CONFIG_CMD_PING=y
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_ALTERA_JTAG_UART=y
+CONFIG_ALTERA_JTAG_UART_BYPASS=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index ccb80d2..5a8cb3a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -109,6 +109,19 @@ config DEBUG_UART_SHIFT
value. Use this value to specify the shift to use, where 0=byte
registers, 2=32-bit word registers, etc.
+config ALTERA_JTAG_UART
+ bool "Altera JTAG UART support"
+ depends on NIOS2 && DM_SERIAL
+ help
+ Select this to enable an JTAG UART for Altera devices.
+
+config ALTERA_JTAG_UART_BYPASS
+ bool "Bypass output when no connection"
+ depends on ALTERA_JTAG_UART
+ help
+ Bypass console output and keep going even if there is no
+ JTAG terminal connection with the host.
+
config ROCKCHIP_SERIAL
bool "Rockchip on-chip UART support"
depends on ARCH_UNIPHIER && DM_SERIAL
diff --git a/drivers/serial/altera_jtag_uart.c
b/drivers/serial/altera_jtag_uart.c
index 9a81402..74a199d 100644
--- a/drivers/serial/altera_jtag_uart.c
+++ b/drivers/serial/altera_jtag_uart.c
@@ -6,98 +6,111 @@
*/
#include <common.h>
-#include <watchdog.h>
+#include <dm.h>
#include <asm/io.h>
-#include <linux/compiler.h>
#include <serial.h>
-typedef volatile struct {
+DECLARE_GLOBAL_DATA_PTR;
+
+struct altera_jtaguart_regs {
unsigned data; /* Data register */
unsigned control; /* Control register */
-} nios_jtag_t;
+};
+
+struct altera_jtaguart_platdata {
+ struct altera_jtaguart_regs *reg;
+};
/* data register */
#define NIOS_JTAG_RVALID (1<<15) /* Read valid */
-#define NIOS_JTAG_DATA(d) ((d)&0x0ff) /* Read data */
-#define NIOS_JTAG_RAVAIL(d) ((d)>>16) /* Read space avail */
/* control register */
-#define NIOS_JTAG_RE (1 << 0) /* read intr enable */
-#define NIOS_JTAG_WE (1 << 1) /* write intr enable */
-#define NIOS_JTAG_RI (1 << 8) /* read intr pending */
-#define NIOS_JTAG_WI (1 << 9) /* write intr pending*/
#define NIOS_JTAG_AC (1 << 10) /* activity indicator */
#define NIOS_JTAG_RRDY (1 << 12) /* read available */
#define NIOS_JTAG_WSPACE(d) ((d)>>16) /* Write space avail */
-DECLARE_GLOBAL_DATA_PTR;
-
-/*------------------------------------------------------------------
- * JTAG acts as the serial port
- *-----------------------------------------------------------------*/
-static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-static void altera_jtag_serial_setbrg(void)
-{
-}
-
-static int altera_jtag_serial_init(void)
+static int altera_jtaguart_putc(struct udevice *dev, const char c)
{
- return 0;
-}
+ struct altera_jtaguart_platdata *plat = dev->platdata;
+ struct altera_jtaguart_regs *const regs = plat->reg;
-static void altera_jtag_serial_putc(char c)
-{
while (1) {
- unsigned st = readl(&jtag->control);
+ unsigned st = readl(®s->control);
if (NIOS_JTAG_WSPACE(st))
break;
#ifdef CONFIG_ALTERA_JTAG_UART_BYPASS
if (!(st & NIOS_JTAG_AC)) /* no connection */
- return;
+ return 0;
#endif
- WATCHDOG_RESET();
}
- writel ((unsigned char)c, &jtag->data);
+ writel((unsigned char)c, ®s->data);
+
+ return 0;
}
-static int altera_jtag_serial_tstc(void)
+static int altera_jtaguart_pending(struct udevice *dev, bool input)
{
- return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
+ struct altera_jtaguart_platdata *plat = dev->platdata;
+ struct altera_jtaguart_regs *const regs = plat->reg;
+ unsigned st = readl(®s->control);
+
+ if (input)
+ return (st & NIOS_JTAG_RRDY) ? 1 : 0;
+ else
+ return NIOS_JTAG_WSPACE(st) ? 0 : 1;
}
-static int altera_jtag_serial_getc(void)
+static int altera_jtaguart_getc(struct udevice *dev)
{
- int c;
+ struct altera_jtaguart_platdata *plat = dev->platdata;
+ struct altera_jtaguart_regs *const regs = plat->reg;
unsigned val;
- while (1) {
- WATCHDOG_RESET ();
- val = readl (&jtag->data);
- if (val & NIOS_JTAG_RVALID)
- break;
- }
- c = val & 0x0ff;
- return (c);
+ while (!((val = readl(®s->data)) & NIOS_JTAG_RVALID))
+ ;
+
+ return (val & 0xff);
}
-static struct serial_device altera_jtag_serial_drv = {
- .name = "altera_jtag_uart",
- .start = altera_jtag_serial_init,
- .stop = NULL,
- .setbrg = altera_jtag_serial_setbrg,
- .putc = altera_jtag_serial_putc,
- .puts = default_serial_puts,
- .getc = altera_jtag_serial_getc,
- .tstc = altera_jtag_serial_tstc,
-};
+static int altera_jtaguart_setbrg(struct udevice *dev, int baudrate)
+{
+ return 0;
+}
-void altera_jtag_serial_initialize(void)
+static int altera_jtaguart_probe(struct udevice *dev)
{
- serial_register(&altera_jtag_serial_drv);
+ return 0;
}
-__weak struct serial_device *default_serial_console(void)
+static int altera_jtaguart_ofdata_to_platdata(struct udevice *dev)
{
- return &altera_jtag_serial_drv;
+ struct altera_jtaguart_platdata *plat = dev_get_platdata(dev);
+
+ plat->reg = ioremap(dev_get_addr(dev),
+ sizeof(struct altera_jtaguart_regs));
+
+ return 0;
}
+
+static const struct dm_serial_ops altera_jtaguart_ops = {
+ .putc = altera_jtaguart_putc,
+ .pending = altera_jtaguart_pending,
+ .getc = altera_jtaguart_getc,
+ .setbrg = altera_jtaguart_setbrg,
+};
+
+static const struct udevice_id altera_jtaguart_ids[] = {
+ { .compatible = "altr,juart-1.0", },
+ { }
+};
+
+U_BOOT_DRIVER(altera_jtaguart) = {
+ .name = "altera_jtaguart",
+ .id = UCLASS_SERIAL,
+ .of_match = altera_jtaguart_ids,
+ .ofdata_to_platdata = altera_jtaguart_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct altera_jtaguart_platdata),
+ .probe = altera_jtaguart_probe,
+ .ops = &altera_jtaguart_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 66ad2f0..bd6d45c 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -23,14 +23,11 @@
/*
* SERIAL
*/
-#define CONFIG_ALTERA_JTAG_UART
#if defined(CONFIG_ALTERA_JTAG_UART)
-# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_JTAG_UART_BASE
#else
# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_UART_BASE
#endif
-#define CONFIG_ALTERA_JTAG_UART_BYPASS
#define CONFIG_SYS_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE CONFIG_SYS_UART_BAUD
#define CONFIG_SYS_BAUDRATE_TABLE {CONFIG_BAUDRATE}
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
