Hi All, unfortunately currently I'm not able to reproduce this issue because boards I'm using are not ported to the best so far u-boot tree. However: - I worked with zlib-1.2.3 patch on my current u-boot version (1.3.1) without problem with sh boards. - This u-boot version is a little bit different about decompression, e.g. here we have gunzip inside cmd_bootm and in the bsf it is in a different file (gunzip.c) - Given this, I backported these into 1.3.1 and tested again, with success. I mean, I tested an old u-boot version with newest decompression code. I think it should be a good test, the one I modified is common code and should be self contained.
I'm wondering if something is going wrong only with PPC arch (errors are related to this arch), and in this case I cannot reproduce the issue at all. Please, is there somebody that can test this patch on a differen arch than PPC? What's your thinking about? Best regards and, please, let me know. Giuseppe Condorelli -----Original Message----- From: Wolfgang Denk [mailto:w...@denx.de] Sent: Friday, July 24, 2009 2:27 PM To: Stefan Roese Cc: u-boot@lists.denx.de; rhabarber1...@web.de; Giuseppe CONDORELLI Subject: Re: [U-Boot] [PATCH v3] zlib: updated to v.1.2.3 Dear Stefan Roese, In message <200907241356.06963...@denx.de> you wrote: > > > Uncompressing Kernel Image ... Error: inflate() returned -2 > > GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to > > recover > > > > Maybe the zlib update is responsible? > > Yes, I'm just noticing the same behaviour: ... > I checked and verified that commit b201171f2b4d509f3ad510b214bee70ff902e3d6 > [zlib: updated to v.1.2.3] is responsible for this. > > So we should probably revert this patch for now. Wolfgang, what do you think? I reverted the patch. Giuseppe, please resubmit, but unly after *thorough* testing, please. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Harrisberger's Fourth Law of the Lab: Experience is directly proportional to the amount of equipment ruined. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot