Hi Hans,
On 17.10.2015 15:47, Hans de Goede wrote:
On 01-10-15 11:41, Stefan Roese wrote:
The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from
In-Circuit:
http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
http://linux-sunxi.org/In-Circuit_ICnova_A20
This patch adds support for this board, including ethernet, LCD and USB
support.
Thanks, I've merged this and it will show up in u-boot-sunxi/next soon.
Thanks.
I've made 2 small changes, see comments inline.
<snip>
diff --git a/configs/icnova-a20-swac_defconfig
b/configs/icnova-a20-swac_defconfig
new file mode 100644
index 0000000..bd6e0c5
--- /dev/null
+++ b/configs/icnova-a20-swac_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
I've dropped this, I understand that you need it, but I do not believe that
ANY defconfig's as shipped upstream should set this.
Hmmm. I would prefer to have this added to the defconfig as well.
As it very likely leads to confusion when updating to a newer
U-Boot version which will not support the old kernel. Why not give
the users / maintainers the freedom to choose this for themselves?
+CONFIG_MMC0_CD_PIN="PI5"
+CONFIG_USB0_VBUS_PIN="PG11"
+CONFIG_USB0_VBUS_DET="PH7"
+CONFIG_USB1_VBUS_PIN="PG10"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="PH22"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-swac"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP"
I've dropped AXP209_POWER from these, in u-boot-sunxi/next this has been
turned into a Kconfig bool which is enabled by default on sun7i.
Understood.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
