On 10/27/2015 12:12 PM, Hoefle Marco wrote: > > >> -----Original Message----- >> From: Michal Simek [mailto:michal.si...@xilinx.com] >> Sent: Montag, 26. Oktober 2015 14:52 >> To: Jagan Teki <jt...@openedev.com>; Hoefle Marco >> <marco.hoe...@nanotronic.ch>; Michal Simek <michal.si...@xilinx.com> >> Cc: u-boot@lists.denx.de >> Subject: Re: [U-Boot] u-boot device model SPI + SPI Flash >> >> On 10/23/2015 12:20 PM, Jagan Teki wrote: >>> On 23 October 2015 at 15:42, Hoefle Marco <marco.hoe...@nanotronic.ch> >> wrote: >>>> Maybe somebody has a valid u-boot dts file for a microblaze system with >> an SPI core? That would helpful. >>>> We want to move from a parallel nor flash to a SPI flash for FPGA config, >> u-boot, Linux Kernel and rootfs. >>>> The last missing part is u-boot. The kernel dts file is ok and the mtd >> partitions are set up correctly. >>> >>> I even grepped on linux/arch/microblaze couldn't get much info, So >>> added Michal he well aware of this may be he can help. >> >> >> http://www.xilinx.com/support/download/index.html/content/xilinx/en/do >> wnloadNav/embedded-design-tools/2015-2.html >> >> ac701 bsp and I expect also Kc705. > > I downloaded the AC701 bsp file but it is not a valid archive. Do I need to > use (and learn how to use) the 3 GB pertalinux tools to build u-boot for > Microblaze? > The u-boot config for the AC701 and the dts file would probably sufficient.
it is tar.gz just rename it. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot