Hi, you have to change microblaze configuration to enable DM. If you look at xilinx git tree then you will have all patches what you need. Unfortunatelly there is no configuration for SPI DM because petalinux is not using microblaze-generic configuration. When I have time I will try to fix this but that's why I don't have now.
Thanks, Michal On 11/03/2015 10:08 AM, Hoefle Marco wrote: > Hello Michal, > I saw a change on this file drivers/mtd/spi/sf-uclass.c regarding the dm > problem. > I replaced this file on mainline u-boot but the result is the same. > Is there anything else to change? > I looked at your here: > https://github.com/Xilinx/u-boot-xlnx/commits/master/drivers/spi > > Thanks, > Marco > > > ________________________________________ > Von: Michal Simek <michal.si...@xilinx.com> > Gesendet: Donnerstag, 29. Oktober 2015 09:22 > An: Hoefle Marco; Michal Simek; Jagan Teki > Cc: u-boot@lists.denx.de; emanuel stiebler > Betreff: Re: AW: [U-Boot] u-boot device model SPI + SPI Flash > > Hi, > > On 10/27/2015 04:03 PM, Hoefle Marco wrote: >> Hello Michal, >> ok I will then stop trying to get SPI working on mainline and watch your >> commits on >> https://github.com/Xilinx/u-boot-xlnx >> >> We have a custom Artix Board here and I would be happy to test your commits >> on our hardware. > > I have sent patches to mainline mailing list and also update xilinx tree. > > petalinux bsp which uses this configuration should be out at the end of Nov. > > Thanks, > Michal > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
