Hi Wenyou, On 30.10.15 02:55, Wenyou Yang wrote: > The board supports following features: > - Boot media support: SD card/e.MMC/SPI flash, > - Support LCD display (optional, disabled by default), > - Support ethernet, > - Support USB mass storage. > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
I'll fix a few checkpatch warnings while applying Andreas > --- > The patch is based on the following patches sent in mailing list. > [PATCH] gpio: atmel: Add the PIO4 driver support > [PATCH] arm: at91: Change the Chip ID registers' addresses > [PATCH v4] mmc: atmel: Add atmel sdhci support > [PATCH v3] arm: at91: clock: Add the generated clock support > > Changes in v6: > 1./ change function invocation due to its declaration change, > at91_enable_periph_generated_clk(). > > Changes in v5: > 1./ remove wrong pin config for USB hw init. > > Changes in v4: > 1./ remove __weak attribute for has_lcdc() added in v3. > 2./ remove unused goto err_exit. > > Changes in v3: > 1./ change defines-->definitions for more clearly in asm/arch/sama5d2.h. > 2./ remove unused cpu_is_sama5d2x() macros. > 3./ fix spelling error "adress". > 4./ add __weak attribute for has_lcdc(). > 5./ remove SPL configs. > > Changes in v2: > 1./ re-order SAMA5D2 statements alphabetically. > 2./ remove redundant "Unknown CPU type". > 3./ rework sama5d2's macros. > 4./ remove some #ifdef before functions. > 5./ move CONFIG_CMD_SF to Kconfig. > 6./ remove NAND macros from config file. > 7./ CONFIG_BOOTCOMMAND for sf uses defines in at91-sama5_common.h. > > arch/arm/mach-at91/Kconfig | 5 + > arch/arm/mach-at91/armv7/Makefile | 1 + > arch/arm/mach-at91/armv7/sama5d2_devices.c | 59 +++++ > arch/arm/mach-at91/include/mach/at91_pmc.h | 9 +- > arch/arm/mach-at91/include/mach/atmel_usba_udc.h | 3 +- > arch/arm/mach-at91/include/mach/hardware.h | 2 + > arch/arm/mach-at91/include/mach/sama5d2.h | 203 ++++++++++++++++ > board/atmel/sama5d2_xplained/Kconfig | 15 ++ > board/atmel/sama5d2_xplained/MAINTAINERS | 7 + > board/atmel/sama5d2_xplained/Makefile | 8 + > board/atmel/sama5d2_xplained/sama5d2_xplained.c | 284 > ++++++++++++++++++++++ > configs/sama5d2_xplained_mmc_defconfig | 11 + > configs/sama5d2_xplained_spiflash_defconfig | 11 + > include/configs/sama5d2_xplained.h | 122 ++++++++++ > 14 files changed, 734 insertions(+), 6 deletions(-) > create mode 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c > create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h > create mode 100644 board/atmel/sama5d2_xplained/Kconfig > create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS > create mode 100644 board/atmel/sama5d2_xplained/Makefile > create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c > create mode 100644 configs/sama5d2_xplained_mmc_defconfig > create mode 100644 configs/sama5d2_xplained_spiflash_defconfig > create mode 100644 include/configs/sama5d2_xplained.h _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot