Hi Andreas, > -----Original Message----- > From: Andreas Bießmann [mailto:andreas.de...@googlemail.com] > Sent: 2015年11月24日 0:29 > To: Yang, Wenyou; U-Boot Mailing List > Cc: Bo Shen > Subject: Re: [U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board > > Hi Wenyou, > > On 30.10.15 02:55, Wenyou Yang wrote: > > The board supports following features: > > - Boot media support: SD card/e.MMC/SPI flash, > > - Support LCD display (optional, disabled by default), > > - Support ethernet, > > - Support USB mass storage. > > > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > > I'll fix a few checkpatch warnings while applying
Thank you very much for your review and your help, > > Andreas > > > --- > > The patch is based on the following patches sent in mailing list. > > [PATCH] gpio: atmel: Add the PIO4 driver support > > [PATCH] arm: at91: Change the Chip ID registers' addresses > > [PATCH v4] mmc: atmel: Add atmel sdhci support > > [PATCH v3] arm: at91: clock: Add the generated clock support > > > > Changes in v6: > > 1./ change function invocation due to its declaration change, > > at91_enable_periph_generated_clk(). > > > > Changes in v5: > > 1./ remove wrong pin config for USB hw init. > > > > Changes in v4: > > 1./ remove __weak attribute for has_lcdc() added in v3. > > 2./ remove unused goto err_exit. > > > > Changes in v3: > > 1./ change defines-->definitions for more clearly in asm/arch/sama5d2.h. > > 2./ remove unused cpu_is_sama5d2x() macros. > > 3./ fix spelling error "adress". > > 4./ add __weak attribute for has_lcdc(). > > 5./ remove SPL configs. > > > > Changes in v2: > > 1./ re-order SAMA5D2 statements alphabetically. > > 2./ remove redundant "Unknown CPU type". > > 3./ rework sama5d2's macros. > > 4./ remove some #ifdef before functions. > > 5./ move CONFIG_CMD_SF to Kconfig. > > 6./ remove NAND macros from config file. > > 7./ CONFIG_BOOTCOMMAND for sf uses defines in at91-sama5_common.h. > > > > arch/arm/mach-at91/Kconfig | 5 + > > arch/arm/mach-at91/armv7/Makefile | 1 + > > arch/arm/mach-at91/armv7/sama5d2_devices.c | 59 +++++ > > arch/arm/mach-at91/include/mach/at91_pmc.h | 9 +- > > arch/arm/mach-at91/include/mach/atmel_usba_udc.h | 3 +- > > arch/arm/mach-at91/include/mach/hardware.h | 2 + > > arch/arm/mach-at91/include/mach/sama5d2.h | 203 ++++++++++++++++ > > board/atmel/sama5d2_xplained/Kconfig | 15 ++ > > board/atmel/sama5d2_xplained/MAINTAINERS | 7 + > > board/atmel/sama5d2_xplained/Makefile | 8 + > > board/atmel/sama5d2_xplained/sama5d2_xplained.c | 284 > ++++++++++++++++++++++ > > configs/sama5d2_xplained_mmc_defconfig | 11 + > > configs/sama5d2_xplained_spiflash_defconfig | 11 + > > include/configs/sama5d2_xplained.h | 122 ++++++++++ > > 14 files changed, 734 insertions(+), 6 deletions(-) create mode > > 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c > > create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h > > create mode 100644 board/atmel/sama5d2_xplained/Kconfig > > create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS > > create mode 100644 board/atmel/sama5d2_xplained/Makefile > > create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c > > create mode 100644 configs/sama5d2_xplained_mmc_defconfig > > create mode 100644 configs/sama5d2_xplained_spiflash_defconfig > > create mode 100644 include/configs/sama5d2_xplained.h Best Regards, Wenyou Yang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot