On 01/12/2016 10:21 PM, Bin Meng wrote: > Hi York, > > On Wed, Jan 13, 2016 at 1:52 AM, York Sun <york...@freescale.com> wrote: >> >> >> On 01/11/2016 10:38 PM, Bin Meng wrote: >>> Before we switch to use driver model ethernet support, disable >>> CONFIG_E1000 temporarily as with driver model ethernet, E1000 >>> driver depends on driver model PCI which is not ready on this >>> board yet. >>> >> >> Any idea when PCI/E1000 can be enabled? >> > > Next on my todo list is to convert layerscape pcie to driver model. > But I suspect we should consolidate that driver with imx pcie driver > first. >
The dilemma here is we heavily depend on the PCIe/e1000 for remote boards in our boardfarms. Once this patch is merged, we will lose network under u-boot. The network interfaces of LS1 itself are used for benchmark and other purpose. We surely can reconfigure the boards but that impacts all the auto scripts. I would prefer to have PCIe/e1000 working first. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot