Create internal routines which take lpuart's register base as
a parameter, in preparation for driver model conversion.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Add missing 'base' parameter in the call to _lpuart_serial_tstc()
- Change internal routines' parameter 'reg' to 'base'
drivers/serial/serial_lpuart.c | 88 +++++++++++++++++++++++++++++++-----------
1 file changed, 66 insertions(+), 22 deletions(-)
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index 0c0ab87..5cc1997 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -50,22 +50,19 @@ DECLARE_GLOBAL_DATA_PTR;
struct lpuart_fsl *base = (struct lpuart_fsl *)LPUART_BASE;
#ifndef CONFIG_LPUART_32B_REG
-static void lpuart_serial_setbrg(void)
+static void _lpuart_serial_setbrg(struct lpuart_fsl *base, int baudrate)
{
u32 clk = mxc_get_clock(MXC_UART_CLK);
u16 sbr;
- if (!gd->baudrate)
- gd->baudrate = CONFIG_BAUDRATE;
-
- sbr = (u16)(clk / (16 * gd->baudrate));
+ sbr = (u16)(clk / (16 * baudrate));
/* place adjustment later - n/32 BRFA */
__raw_writeb(sbr >> 8, &base->ubdh);
__raw_writeb(sbr & 0xff, &base->ubdl);
}
-static int lpuart_serial_getc(void)
+static int _lpuart_serial_getc(struct lpuart_fsl *base)
{
while (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR)))
WATCHDOG_RESET();
@@ -75,10 +72,10 @@ static int lpuart_serial_getc(void)
return __raw_readb(&base->ud);
}
-static void lpuart_serial_putc(const char c)
+static void _lpuart_serial_putc(struct lpuart_fsl *base, const char c)
{
if (c == '\n')
- lpuart_serial_putc('\r');
+ _lpuart_serial_putc(base, '\r');
while (!(__raw_readb(&base->us1) & US1_TDRE))
WATCHDOG_RESET();
@@ -87,7 +84,7 @@ static void lpuart_serial_putc(const char c)
}
/* Test whether a character is in the RX buffer */
-static int lpuart_serial_tstc(void)
+static int _lpuart_serial_tstc(struct lpuart_fsl *base)
{
if (__raw_readb(&base->urcfifo) == 0)
return 0;
@@ -99,7 +96,7 @@ static int lpuart_serial_tstc(void)
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
-static int lpuart_serial_init(void)
+static int _lpuart_serial_init(struct lpuart_fsl *base)
{
u8 ctrl;
@@ -118,13 +115,38 @@ static int lpuart_serial_init(void)
__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
/* provide data bits, parity, stop bit, etc */
- lpuart_serial_setbrg();
+ _lpuart_serial_setbrg(base, gd->baudrate);
__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
return 0;
}
+static void lpuart_serial_setbrg(void)
+{
+ _lpuart_serial_setbrg(base, gd->baudrate);
+}
+
+static int lpuart_serial_getc(void)
+{
+ return _lpuart_serial_getc(base);
+}
+
+static void lpuart_serial_putc(const char c)
+{
+ _lpuart_serial_putc(base, c);
+}
+
+static int lpuart_serial_tstc(void)
+{
+ return _lpuart_serial_tstc(base);
+}
+
+static int lpuart_serial_init(void)
+{
+ return _lpuart_serial_init(base);
+}
+
static struct serial_device lpuart_serial_drv = {
.name = "lpuart_serial",
.start = lpuart_serial_init,
@@ -136,21 +158,18 @@ static struct serial_device lpuart_serial_drv = {
.tstc = lpuart_serial_tstc,
};
#else
-static void lpuart32_serial_setbrg(void)
+static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
{
u32 clk = CONFIG_SYS_CLK_FREQ;
u32 sbr;
- if (!gd->baudrate)
- gd->baudrate = CONFIG_BAUDRATE;
-
- sbr = (clk / (16 * gd->baudrate));
+ sbr = (clk / (16 * baudrate));
/* place adjustment later - n/32 BRFA */
out_be32(&base->baud, sbr);
}
-static int lpuart32_serial_getc(void)
+static int _lpuart32_serial_getc(struct lpuart_fsl *base)
{
u32 stat;
@@ -162,10 +181,10 @@ static int lpuart32_serial_getc(void)
return in_be32(&base->data) & 0x3ff;
}
-static void lpuart32_serial_putc(const char c)
+static void _lpuart32_serial_putc(struct lpuart_fsl *base, const char c)
{
if (c == '\n')
- lpuart32_serial_putc('\r');
+ _lpuart32_serial_putc(base, '\r');
while (!(in_be32(&base->stat) & STAT_TDRE))
WATCHDOG_RESET();
@@ -174,7 +193,7 @@ static void lpuart32_serial_putc(const char c)
}
/* Test whether a character is in the RX buffer */
-static int lpuart32_serial_tstc(void)
+static int _lpuart32_serial_tstc(struct lpuart_fsl *base)
{
if ((in_be32(&base->water) >> 24) == 0)
return 0;
@@ -186,7 +205,7 @@ static int lpuart32_serial_tstc(void)
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
-static int lpuart32_serial_init(void)
+static int _lpuart32_serial_init(struct lpuart_fsl *base)
{
u8 ctrl;
@@ -201,13 +220,38 @@ static int lpuart32_serial_init(void)
out_be32(&base->match, 0);
/* provide data bits, parity, stop bit, etc */
- lpuart32_serial_setbrg();
+ _lpuart32_serial_setbrg(base, gd->baudrate);
out_be32(&base->ctrl, CTRL_RE | CTRL_TE);
return 0;
}
+static void lpuart32_serial_setbrg(void)
+{
+ _lpuart32_serial_setbrg(base, gd->baudrate);
+}
+
+static int lpuart32_serial_getc(void)
+{
+ return _lpuart32_serial_getc(base);
+}
+
+static void lpuart32_serial_putc(const char c)
+{
+ _lpuart32_serial_putc(base, c);
+}
+
+static int lpuart32_serial_tstc(void)
+{
+ return _lpuart32_serial_tstc(base);
+}
+
+static int lpuart32_serial_init(void)
+{
+ return _lpuart32_serial_init(base);
+}
+
static struct serial_device lpuart32_serial_drv = {
.name = "lpuart32_serial",
.start = lpuart32_serial_init,
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
