Looks good to me, Acked-by: Stefan Agner <stefan.ag...@toradex.com>
On 13.01.2016 19:39, Bin Meng wrote: > LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. > Create a Kconfig option and move it to defconfig for all boards > that have this serial driver. > > Signed-off-by: Bin Meng <bmeng...@gmail.com> > Reviewed-by: Simon Glass <s...@chromium.org> > --- > > Changes in v2: None > > configs/colibri_vf_defconfig | 1 + > configs/colibri_vf_dtb_defconfig | 1 + > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + > configs/ls1021aqds_nor_lpuart_defconfig | 1 + > configs/ls1021atwr_nor_lpuart_defconfig | 1 + > configs/pcm052_defconfig | 1 + > configs/vf610twr_defconfig | 1 + > configs/vf610twr_nand_defconfig | 1 + > drivers/serial/Kconfig | 6 ++++++ > include/configs/colibri_vf.h | 1 - > include/configs/ls1021aqds.h | 1 - > include/configs/ls1021atwr.h | 1 - > include/configs/pcm052.h | 1 - > include/configs/vf610twr.h | 1 - > 14 files changed, 14 insertions(+), 5 deletions(-) > > diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig > index f8441e3..45917c8 100644 > --- a/configs/colibri_vf_defconfig > +++ b/configs/colibri_vf_defconfig > @@ -8,3 +8,4 @@ CONFIG_CMD_GPIO=y > CONFIG_DM=y > CONFIG_NAND_VF610_NFC=y > CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/colibri_vf_dtb_defconfig > b/configs/colibri_vf_dtb_defconfig > index 3596cec..b1a843a 100644 > --- a/configs/colibri_vf_dtb_defconfig > +++ b/configs/colibri_vf_dtb_defconfig > @@ -11,3 +11,4 @@ CONFIG_OF_CONTROL=y > CONFIG_DM=y > CONFIG_NAND_VF610_NFC=y > CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig > b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig > index 68bd117..44b2a0d 100644 > --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig > +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig > @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART" > # CONFIG_CMD_SETEXPR is not set > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/ls1021aqds_nor_lpuart_defconfig > b/configs/ls1021aqds_nor_lpuart_defconfig > index b2f6832..1186af2 100644 > --- a/configs/ls1021aqds_nor_lpuart_defconfig > +++ b/configs/ls1021aqds_nor_lpuart_defconfig > @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART" > # CONFIG_CMD_SETEXPR is not set > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/ls1021atwr_nor_lpuart_defconfig > b/configs/ls1021atwr_nor_lpuart_defconfig > index d7afca9..58cd61f 100644 > --- a/configs/ls1021atwr_nor_lpuart_defconfig > +++ b/configs/ls1021atwr_nor_lpuart_defconfig > @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART" > # CONFIG_CMD_SETEXPR is not set > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig > index 9125645..26ab733 100644 > --- a/configs/pcm052_defconfig > +++ b/configs/pcm052_defconfig > @@ -3,3 +3,4 @@ CONFIG_TARGET_PCM052=y > > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND" > CONFIG_NAND_VF610_NFC=y > CONFIG_SYS_NAND_BUSWIDTH_16BIT=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig > index dc8df5c..d51c93b 100644 > --- a/configs/vf610twr_defconfig > +++ b/configs/vf610twr_defconfig > @@ -6,3 +6,4 @@ > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I > CONFIG_NAND_VF610_NFC=y > CONFIG_SYS_NAND_BUSWIDTH_16BIT=y > CONFIG_SPI_FLASH=y > +CONFIG_FSL_LPUART=y > diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig > index 98880f3..299fa8f 100644 > --- a/configs/vf610twr_nand_defconfig > +++ b/configs/vf610twr_nand_defconfig > @@ -6,3 +6,4 @@ > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I > CONFIG_NAND_VF610_NFC=y > CONFIG_SYS_NAND_BUSWIDTH_16BIT=y > CONFIG_SPI_FLASH=y > +CONFIG_FSL_LPUART=y > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > index 1fc287e..3b54511 100644 > --- a/drivers/serial/Kconfig > +++ b/drivers/serial/Kconfig > @@ -186,6 +186,12 @@ config ALTERA_UART > Select this to enable an UART for Altera devices. Please find > details on the "Embedded Peripherals IP User Guide" of Altera. > > +config FSL_LPUART > + bool "Freescale LPUART support" > + help > + Select this to enable a Low Power UART for Freescale VF610 and > + QorIQ Layerscape devices. > + > config SYS_NS16550 > bool "NS16550 UART or compatible" > help > diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h > index 708c79a..5aed3a5 100644 > --- a/include/configs/colibri_vf.h > +++ b/include/configs/colibri_vf.h > @@ -36,7 +36,6 @@ > > #define CONFIG_BOARD_EARLY_INIT_F > > -#define CONFIG_FSL_LPUART > #define LPUART_BASE UART0_BASE > > /* Allow to overwrite serial and ethaddr */ > diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h > index 2e8dbc7..e8b1eca 100644 > --- a/include/configs/ls1021aqds.h > +++ b/include/configs/ls1021aqds.h > @@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void); > * Serial Port > */ > #ifdef CONFIG_LPUART > -#define CONFIG_FSL_LPUART > #define CONFIG_LPUART_32B_REG > #else > #define CONFIG_CONS_INDEX 1 > diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h > index bbef2a7..317ba62 100644 > --- a/include/configs/ls1021atwr.h > +++ b/include/configs/ls1021atwr.h > @@ -266,7 +266,6 @@ > * Serial Port > */ > #ifdef CONFIG_LPUART > -#define CONFIG_FSL_LPUART > #define CONFIG_LPUART_32B_REG > #else > #define CONFIG_CONS_INDEX 1 > diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h > index b851bba..891bdb0 100644 > --- a/include/configs/pcm052.h > +++ b/include/configs/pcm052.h > @@ -27,7 +27,6 @@ > > #define CONFIG_BOARD_EARLY_INIT_F > > -#define CONFIG_FSL_LPUART > #define LPUART_BASE UART1_BASE > > /* Allow to overwrite serial and ethaddr */ > diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h > index 34df6f0..dcfafaf 100644 > --- a/include/configs/vf610twr.h > +++ b/include/configs/vf610twr.h > @@ -34,7 +34,6 @@ > > #define CONFIG_BOARD_EARLY_INIT_F > > -#define CONFIG_FSL_LPUART > #define LPUART_BASE UART1_BASE > > /* Allow to overwrite serial and ethaddr */ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot