On Thu, 2016-01-14 at 18:06 +0000, york sun wrote: > On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote: > > kernel_size env variable is defined as 0x28000000, it is beyond NOR > > flash. > > > > Update kernel_size with 40MB kernel size. > > > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > > --- > > include/configs/ls2080aqds.h | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h > > index ba84248..a402c06 100644 > > --- a/include/configs/ls2080aqds.h > > +++ b/include/configs/ls2080aqds.h > > @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void); > > "initrd_high=0xffffffffffffffff\0" \ > > "kernel_start=0x581100000\0" \ > > "kernel_load=0xa0000000\0" \ > > - "kernel_size=0x28000000\0" > > + "kernel_size=0x2800000\0" > > > > #ifdef CONFIG_FSL_MC_ENET > > #define CONFIG_FSL_MEMAC > > > Prabhakar, > > I am tired of these changes. Can you go over all the default settings and > verify > they all make sense? A short while ago Scott found fdt_high was not correct.
That was ls1021a. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot