> -----Original Message----- > From: york sun > Sent: Wednesday, January 27, 2016 11:09 PM > To: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>; u- > b...@lists.denx.de > Cc: Scott Wood <o...@buserror.net> > Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env variable > > On 01/14/2016 08:53 PM, Prabhakar Kushwaha wrote: > > > >> -----Original Message----- > >> From: york sun [mailto:york....@nxp.com] > >> Sent: Thursday, January 14, 2016 11:37 PM > >> To: Prabhakar Kushwaha <prabha...@freescale.com>; > >> u-boot@lists.denx.de > >> Cc: Scott Wood <o...@buserror.net> > >> Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env > >> variable > >> > >> On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote: > >>> kernel_size env variable is defined as 0x28000000, it is beyond NOR > >>> flash. > >>> > >>> Update kernel_size with 40MB kernel size. > >>> > >>> Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > >>> --- > >>> include/configs/ls2080aqds.h | 2 +- > >>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>> > >>> diff --git a/include/configs/ls2080aqds.h > >>> b/include/configs/ls2080aqds.h index ba84248..a402c06 100644 > >>> --- a/include/configs/ls2080aqds.h > >>> +++ b/include/configs/ls2080aqds.h > >>> @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void); > >>> "initrd_high=0xffffffffffffffff\0" \ > >>> "kernel_start=0x581100000\0" \ > >>> "kernel_load=0xa0000000\0" \ > >>> - "kernel_size=0x28000000\0" > >>> + "kernel_size=0x2800000\0" > >>> > >>> #ifdef CONFIG_FSL_MC_ENET > >>> #define CONFIG_FSL_MEMAC > >>> > >> Prabhakar, > >> > >> I am tired of these changes. Can you go over all the default settings > >> and verify they all make sense? > > > > I agree. > > > > Let me review all settings and provide one patch to fix all of them at once. > > Do you want to hold this patch till I check and provide patch (if > > required) > > > >> A short while ago Scott found fdt_high was not correct. > > > > Is this change part of code or not? > > > > Prabhakar, > > Do you have update on this patch? >
I compared both QDS and RDB configuration files. They will be equal after merger of this patch. No patch update is required. --prabhakar _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot