If full pinctrl is enabled we don't need to manually set the pinctrl in the
driver. It will happen automatically. Adjust the code to suit - we will
still use manual mode in SPL.

Signed-off-by: Simon Glass <s...@chromium.org>
---

Changes in v9: None
Changes in v2: None

 drivers/spi/rk_spi.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c
index 62434be..2b58393 100644
--- a/drivers/spi/rk_spi.c
+++ b/drivers/spi/rk_spi.c
@@ -182,13 +182,15 @@ static int rockchip_spi_probe(struct udevice *bus)
 static int rockchip_spi_claim_bus(struct udevice *dev)
 {
        struct udevice *bus = dev->parent;
-       struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
        struct rockchip_spi_priv *priv = dev_get_priv(bus);
        struct rockchip_spi *regs = priv->regs;
-       struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
        u8 spi_dfs, spi_tf;
        uint ctrlr0;
+#if !CONFIG_IS_ENABLED(PINCTRL_FULL)
+       struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
+       struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
        int ret;
+#endif
 
        /* Disable the SPI hardware */
        rkspi_enable_chip(regs, 0);
@@ -249,12 +251,13 @@ static int rockchip_spi_claim_bus(struct udevice *dev)
        ctrlr0 |= (priv->tmode & TMOD_MASK) << TMOD_SHIFT;
 
        writel(ctrlr0, &regs->ctrlr0);
-
+#if !CONFIG_IS_ENABLED(PINCTRL_FULL)
        ret = pinctrl_request(plat->pinctrl, plat->periph_id, slave_plat->cs);
        if (ret) {
                debug("%s: Cannot request pinctrl: %d\n", __func__, ret);
                return ret;
        }
+#endif
 
        return 0;
 }
-- 
2.7.0.rc3.207.g0ac5344

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to