It is useful to be able to read the rate of a peripheral clock. Add a
handler for that.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v9: None
Changes in v2: None
drivers/clk/clk_rk3288.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c
index 49c2bdf..df5c38c 100644
--- a/drivers/clk/clk_rk3288.c
+++ b/drivers/clk/clk_rk3288.c
@@ -508,6 +508,42 @@ static ulong rockchip_spi_set_clk(struct rk3288_cru *cru,
uint gclk_rate,
return rockchip_spi_get_clk(cru, gclk_rate, periph);
}
+static ulong rk3288_get_periph_rate(struct udevice *dev, int periph)
+{
+ struct rk3288_clk_priv *priv = dev_get_priv(dev);
+ struct udevice *gclk;
+ ulong new_rate, gclk_rate;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_CLK, CLK_GENERAL, &gclk);
+ if (ret)
+ return ret;
+ gclk_rate = clk_get_rate(gclk);
+ switch (periph) {
+ case HCLK_EMMC:
+ case HCLK_SDIO0:
+ case HCLK_SDIO1:
+ new_rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, periph);
+ break;
+ case SCLK_SPI0:
+ case SCLK_SPI1:
+ case SCLK_SPI2:
+ new_rate = rockchip_spi_get_clk(priv->cru, gclk_rate, periph);
+ break;
+ case PCLK_I2C0:
+ case PCLK_I2C1:
+ case PCLK_I2C2:
+ case PCLK_I2C3:
+ case PCLK_I2C4:
+ case PCLK_I2C5:
+ return gclk_rate;
+ default:
+ return -ENOENT;
+ }
+
+ return new_rate;
+}
+
static ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong
rate)
{
struct rk3288_clk_priv *priv = dev_get_priv(dev);
@@ -543,6 +579,7 @@ static struct clk_ops rk3288_clk_ops = {
.get_rate = rk3288_clk_get_rate,
.set_rate = rk3288_clk_set_rate,
.set_periph_rate = rk3288_set_periph_rate,
+ .get_periph_rate = rk3288_get_periph_rate,
};
static int rk3288_clk_probe(struct udevice *dev)
--
2.7.0.rc3.207.g0ac5344
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
