At present u-boot.bin holds the plain U-Boot binary without the device tree. This is somewhat annoying since you need either u-boot.bin or u-boot-dtb.bin depending on whether device tree is used.
This series adjusts the build such that u-boot.bin includes a device tree, and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin remains the same. This should be acceptable since: - without OF_CONTROL, u-boot.bin still does not include a device tree - with OF_CONTROL, u-boot-dtb.bin does not change The main impact is build systems which are set up to use u-boot.bin as the output file and then add a device tree. These will have to change to use u-boot-nodtb.bin instead. The original decision to use a separate u-boot-dtb.bin was aimed at allowing any device tree file to be concatenated to the u-boot.bin image after the build. However this no-longer seems so important. More important is the convenience of using the same output file regardless of the setting for OF_CONTROL. Simon Glass (7): tegra: Drop generation of -nodtb file with OF_CONTROL fdt: Build a U-Boot binary without device tree fdt: Build an SPL binary without device tree tegra: Always build a boot image with the same filename socfpga: Simplify Makefile filenames Makefile: Make u-boot.img the same as u-boot-dtb.img Makefile: Drop unnecessary -dtb suffixes Makefile | 67 ++++++++++++++++++++++++++-------------------------- scripts/Makefile.spl | 26 +++++++++++++------- 2 files changed, 50 insertions(+), 43 deletions(-) -- 2.7.0.rc3.207.g0ac5344 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
