When OF_CONTROL is enabled, u-boot-dtb.* files are the same as u-boot.*
files. So we can use the latter for simplicity.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Makefile | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/Makefile b/Makefile
index d432000..c15a5ac 100644
--- a/Makefile
+++ b/Makefile
@@ -920,7 +920,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n
$(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
$(call if_changed,mkimage)
-u-boot-spl.kwb: u-boot-dtb.img spl/u-boot-spl.bin FORCE
+u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
u-boot.sha1: u-boot.bin
@@ -1061,7 +1061,7 @@ endif
cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
cmd_ifdtool += mv u-boot.tmp $@
-u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
+u-boot.rom: u-boot-x86-16bit.bin u-boot.bin
$(call if_changed,ifdtool)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
@@ -1072,8 +1072,7 @@ endif
ifneq ($(CONFIG_SUNXI),)
OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
- u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
$(call if_changed,pad_cat)
endif
@@ -1090,7 +1089,7 @@ OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
u-boot-app.efi: u-boot FORCE
$(call if_changed,zobjcopy)
-u-boot-dtb.bin.o: u-boot-dtb.bin FORCE
+u-boot.bin.o: u-boot.bin FORCE
$(call if_changed,efipayload)
u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
@@ -1100,10 +1099,10 @@ u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
quiet_cmd_u-boot_payload ?= LD $@
cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
-T u-boot-payload.lds arch/x86/cpu/call32.o \
- lib/efi/efi.o lib/efi/efi_stub.o u-boot-dtb.bin.o \
+ lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
$(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
-u-boot-payload: u-boot-dtb.bin.o u-boot-payload.lds FORCE
+u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
$(call if_changed,u-boot_payload)
OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
--
2.7.0.rc3.207.g0ac5344
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
