On Wed, Jan 27, 2016 at 10:23 AM, Alexey Brodkin <alexey.brod...@synopsys.com> wrote: > Hi Joe, > > On Tue, 2016-01-19 at 07:02 +0000, Alexey Brodkin wrote: >> Hi Joe, >> >> On Wed, 2016-01-13 at 16:59 +0300, Alexey Brodkin wrote: >> > In some cases Ethernet PHY and network itself might support speeds >> > which are not supported by Ethernet controller (MAC). >> > >> > To support that kind of situation it is required to force limit >> > PHY so it is not configured for unsupported mode or even if PHY >> > autonegotiated too high speed it will be reconfigured for slower mode. >> > >> > Note this series is v2 because v1 patches were sent separately not being >> > aranged in series. And now I'm putting all patches in one series >> > and marking it v2 even though no changes were done in patches itself. >> > >> > Alexey Brodkin (4): >> > drivers/net/phy: introduce phy_set_supported() >> > include/net.h: add max_speed member in struct eth_pdata >> > net/designware: do explicit port selection for 1Gb mode >> > net/designware: add support of max-speed device tree property >> > >> > Florian Fainelli (2): >> > net: phy: ensure Gigabit features are masked off if requested >> > net: phy: breakdown PHY_*_FEATURES defines >> > >> > Sascha Hauer (1): >> > net: phy: genphy: Allow overwriting features >> > >> > drivers/net/designware.c | 16 +++++++++- >> > drivers/net/designware.h | 1 + >> > drivers/net/phy/phy.c | 77 >> > ++++++++++++++++++++++++++++++++++-------------- >> > include/net.h | 2 ++ >> > include/phy.h | 23 ++++++++++----- >> > 5 files changed, 89 insertions(+), 30 deletions(-) >> >> Please treat this as a polite reminder to review >> that series sometime soon. > > Thank you for reviewing that series. > I'm wondering who's going to pick it up?
I'm picking it up now and build testing it. Thanks, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot