On 02/08/2016 04:57 PM, York Sun wrote: > Since a recent merge 5160def "dm: lpuart: Drop the legacy code", > ls1021aqds_ddr4_nor_lpuart and ls1021aqds_nor_lpuart failed to > compile because they are using legacy driver for lpuart. Following > ls1021atwr, ls1021aqds should be converted as well. > > Not tested on boards yet. Serial DM driver is not enabled for SD > and QSPI configuration. > > > York Sun (2): > arm: ls1021aqds: Convert to driver model and enable serial support > arm: ls1021aqds: Enable driver model lpuart serial driver > > arch/arm/dts/Makefile | 3 ++- > arch/arm/dts/ls1021a-qds-duart.dts | 16 ++++++++++++++++ > arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++ > arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +-- > configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++ > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++ > configs/ls1021aqds_nor_defconfig | 4 ++++ > configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++ > configs/ls1021aqds_qspi_defconfig | 2 +- > configs/ls1021aqds_sdcard_defconfig | 3 +++ > include/configs/ls1021aqds.h | 2 ++ > 11 files changed, 57 insertions(+), 4 deletions(-) > create mode 100644 arch/arm/dts/ls1021a-qds-duart.dts > create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts > rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%) >
Alison, Please review this set when you come back. I could only test NOR boot on the remote board. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot