Hi, York, > On 02/08/2016 04:57 PM, York Sun wrote: > > Since a recent merge 5160def "dm: lpuart: Drop the legacy code", > > ls1021aqds_ddr4_nor_lpuart and ls1021aqds_nor_lpuart failed to compile > > because they are using legacy driver for lpuart. Following ls1021atwr, > > ls1021aqds should be converted as well. > > > > Not tested on boards yet. Serial DM driver is not enabled for SD and > > QSPI configuration. > > > > > > York Sun (2): > > arm: ls1021aqds: Convert to driver model and enable serial support > > arm: ls1021aqds: Enable driver model lpuart serial driver > > > > arch/arm/dts/Makefile | 3 ++- > > arch/arm/dts/ls1021a-qds-duart.dts | 16 > ++++++++++++++++ > > arch/arm/dts/ls1021a-qds-lpuart.dts | 16 > ++++++++++++++++ > > arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +-- > > configs/ls1021aqds_ddr4_nor_defconfig | 4 ++++ > > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++ > > configs/ls1021aqds_nor_defconfig | 4 ++++ > > configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++ > > configs/ls1021aqds_qspi_defconfig | 2 +- > > configs/ls1021aqds_sdcard_defconfig | 3 +++ > > include/configs/ls1021aqds.h | 2 ++ > > 11 files changed, 57 insertions(+), 4 deletions(-) create mode > > 100644 arch/arm/dts/ls1021a-qds-duart.dts > > create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts > > rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%) > > > > Alison, > > Please review this set when you come back. I could only test NOR boot on > the remote board. > [Alison Wang] I reviewed this set, and have no other comments except Bin Meng's.
BTW, I tested this set on LS1021AQDS board with that little modification. Best Regards, Alison Wang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot