[..snip..]
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 6308cab8e680..1fffdb18fbcd 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -88,4 +88,8 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+/* EEPROM */
+#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
+#define CONFIG_EEPROM_BUS_ADDRESS 0
+
#endif /* __CONFIG_AM57XX_EVM_H */
diff --git a/include/configs/ti_omap5_common.h
b/include/configs/ti_omap5_common.h
index d164e6abd450..d373cbc44a16 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -117,6 +117,8 @@
"setenv fdtfile dra72-evm.dtb; fi;" \
"if test $board_name = beagle_x15; then " \
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+ "if test $board_name = am57xx_evm; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
Is it the same dtb file for am57xx_evm as well? or is this intentional
and will be updated later?
Thanks and regards,
Lokesh
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi;
\0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
