On 19/05/16 21:51, Robert Gadsdon wrote: > Applied this on my Odroid C2, and it worked OK when installed on the > SDcard, but failed when installed on the eMMC module: > > => version > U-Boot 2016.05-rc3 (May 14 2016 - 21:06:28 -0700) odroid-c2 > aarch64-linux-gnu-gcc (GCC) 5.3.1 20160212 (Red Hat Cross 5.3.1-2) > GNU ld version 2.26.20160125 > > => mmc info > Card did not respond to voltage select!
Yes, this is expected since the muxing in the board file is only enabling the SDcard. Could you try to set the correct muxing also for the eMMC and check again? Unfortunately I don't have an eMMC for the Odroid-C2 to check this out. I'll try to prepare a board file also for the P20x so I can test this better. Thank you for testing this BTW. Cheers, -- Carlo Caione _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
